Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

1134.085
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
11.41
χωρίς ΦΠΑ 9.20
Μη Διαθέσιμο
1134.086
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
11.41
χωρίς ΦΠΑ 9.20
Μη Διαθέσιμο
1134.087
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
11.41
χωρίς ΦΠΑ 9.20
Μη Διαθέσιμο
1134.088
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
11.41
χωρίς ΦΠΑ 9.20
Μη Διαθέσιμο
1134.089
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to...
11.41
χωρίς ΦΠΑ 9.20
Μη Διαθέσιμο
1134.035
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
111.60
χωρίς ΦΠΑ 90.00
Σε Απόθεμα
+
1134.036
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
93.00
χωρίς ΦΠΑ 75.00
Σε Απόθεμα
+
1134.039
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
15.19
χωρίς ΦΠΑ 12.25
Σε Απόθεμα
+
1134.040
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
15.19
χωρίς ΦΠΑ 12.25
Σε Απόθεμα
+
1134.041
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
15.19
χωρίς ΦΠΑ 12.25
Σε Απόθεμα
+
1134.042
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
15.19
χωρίς ΦΠΑ 12.25
Σε Απόθεμα
+
1134.043
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
15.19
χωρίς ΦΠΑ 12.25
Σε Απόθεμα
+
1134.037
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
111.60
χωρίς ΦΠΑ 90.00
Σε Απόθεμα
+
1134.038
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
120.28
χωρίς ΦΠΑ 97.00
Σε Απόθεμα
+
1134.078
These pneumatic fittings have a brass metal body which is designed to provide a simple and cost-effective way of inserting bowden tubing directly into your aluminium components. The couplings are designed to take PTFE tubing with an outer diameter of a 1/8" (3.18mm) for 1.75mm filament, and...
3.43
χωρίς ΦΠΑ 2.77
Μη Διαθέσιμο
1134.081
0.15mm Experimental High-Resolution Nozzle This 0.15mm nozzle allows you to print some really, seriously, very, extremely tiny parts with with a level of fine detail that will blow you away. We wrote a whole blog post about it! For complete requirements and specifications check our blog and...
22.88
χωρίς ΦΠΑ 18.45
Μη Διαθέσιμο
1134.103
This motor uses a planetary gearbox with a 5.18:1 reduction. This gives you up to 196Ncm of torque without the need for high current stepper drivers, however you will not be able to run this motor as fast as a non-geared one. The main application of this motor is in direct extruders. NEMA...
51.65
χωρίς ΦΠΑ 41.65
Μη Διαθέσιμο
1134.045
This is a neat little solution for quickly and easily converting a direct extruder that would normally accept a groovemount hotend into a bowden extruder. Simply mounts in like a Hot End, but instead accepts our PTFE tubing securely in an embedded bowden coupler. This is a neat little solution...
9.05
χωρίς ΦΠΑ 7.30
Σε Απόθεμα
+
1134.090
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
29.33
χωρίς ΦΠΑ 23.65
Μη Διαθέσιμο
1134.091
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
29.33
χωρίς ΦΠΑ 23.65
Μη Διαθέσιμο
1134.092
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
29.33
χωρίς ΦΠΑ 23.65
Μη Διαθέσιμο
1134.093
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
29.33
χωρίς ΦΠΑ 23.65
Μη Διαθέσιμο
1134.094
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
29.33
χωρίς ΦΠΑ 23.65
Σε Απόθεμα
+
1134.017
3D Printer Ceramic Heater Cartridge - 12v - 30w | E3D Online | E3D Online 12v 30w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot...
9.05
χωρίς ΦΠΑ 7.30
Μη Διαθέσιμο
Επόμενα 24 προϊόντα
Φίλτρα Φίλτρα