MikroTik RBwAPR-2nD&R11e-LTE, wAP LTE kit, 2dBi, 650MHz, 64MB, 1xminiPCI-e, 1xEthernet

MikroTik RBwAPR-2nD&R11e-LTE, wAP LTE kit, 2dBi, 650MHz, 64MB, 1xminiPCI-e, 1xEthernet

Περάστε πάνω απο την φωτογραφία για μεγέθυνση.

1002.211
105.64
(130.99 με Φ.Π.Α.)
Σε Απόθεμα
+
Brand: MIKROTIK
MPN: RBwAPR-2nD&R11e-LTE
Τρόποι Αποστολής
Τρόποι Πληρωμής
Γιατί Cableworks.gr

Όλα τα προϊόντα με εγγύηση κατασκευαστή6-36 Μήνες

Ενημέρωση για την εξέλιξη της παραγγελίαςΕνημέρωση για την εξέλιξη της παραγγελίας

Επιστροφές εντός 14 ημερολογιακών ημερώνΕπιστροφές εντός 14 ημερολογιακών ημερών.

Ευελιξία στους Τρόπους πληρωμήςΕυελιξία στους Τρόπους πληρωμής

Ωράριο ΚαταστήματοςΩράριο Καταστήματος

Επικοινωνία

wAP LTE kit

The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices.

LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train.

RBwAPR-2nD&R11e-LTE includes LTE modem that supports International LTE bands 1,2,3,7,8,20,38 and 40.

Product specifications

Details
Product code RBwAPR-2nD&R11e-LTE
10/100 Ethernet ports 1
802.11b Yes
802.11g Yes
802.11n Yes
Antenna gain 2 no
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
Dimensions 185 x 85 x 30 mm
License level 4
Max Power consumption 8W
MiniPCI-e slots 1
Number of chains 2
Operating System RouterOS
PCB temperature monitor Yes
PoE in Passive PoE
Power Jack 1
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Supported input voltage 9 V - 30 V
Tested ambient temperature -40°C .. +60°C tested
Voltage Monitor Yes
Wireless chip model QCA9531
Wireless standards 802.11b/g/n

Wireless specifications

2.4 GHz
 Transmit power (dBm)Receive SensitivityTransmit power (mW)
1MBit/s 22 -96 158
11MBit/s 22 -89 158
6MBit/s 20 -93 100
54MBit/s 18 -74 63
MCS0 20 -93 100
MCS7 16 -71 40

 

Ethernet test results

RBwAPR-2nD&R11e-LTE QCA9531 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

 

Google export features

Brand:
MIKROTIK
MPN:
RBwAPR-2nD&R11e-LTE

Datasheet (wAP_lte_kit-170720142523.pdf, 2,786 Kb) [Λήψη]

ΙΟΥΛΙΟ & ΑΥΓΟΥΣΤΟ, ΤΑ ΣΑΒΒΑΤΑ ΞΕΚΟΥΡΑΣΗ!

Αγαπητοί μας πελάτες,

θα θέλαμε να σας ενημερώσουμε πως για τον Ιούλιο και τον Άυγουστο η εταιρία θα λειτουργεί από Δευτέρα έως Παρασκευή 09:00 - 17:00 και τα Σάββατα θα παραμένει κλειστή! Σας ευχόμαστε καλή ξεκούραση!


Με εκτίμηση, 

η ομάδα της edgepoint