Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

QR Barcode Scanner V3.0 - Scan Recognition Module with Serial Communication Uart and Usb Interface
Κωδικός Cableworks: 1256.192

BrandOEM MPNOEM
42.56
χωρίς ΦΠΑ 34.32
Μη Διαθέσιμο
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί Cableworks;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

CABLEWORKS

Αναλυτική Παρουσίαση

Product introduction:

MH -ET LIVE Scanner v3.0 is a barcode and QR code scanning recognition module. It adopts a professional image processing chip for barcode recognition. It can quickly and accurately read under the high performance of fast and stable reading in complex environments. Take one-dimensional code and two-dimensional code on the carrier of paper, screen, plastic, etc. . Small in size, onboard USB and UART interface, can be directly connected to the computer, or integrated into a variety of devices. The product features low power consumption and low heat. Quick start, cold start and warm start can be kept on standby, no need to wait, it is ready to open.

Product features:

⚫ Easy to operate, no need to understand complex image recognition algorithms ⚫ Support for reading of common one-dimensional codes and two-dimensional codes such as Barcode and QR ⚫ Onboard micro USB and UART serial port for access to a computer or embedded device ⚫ Onboard auxiliary light source for reading in a completely dark environment ⚫ Support for setting module parameters by scanning the setup code (see the specification for details) Settable parameters include (read mode, baud rate setting, command mode, prompt tone output adjustment, output format, barcode selective setting)

Type of barcode/QR code reading:

Read barcode type (1D): UPC/EAN, UPC/EAN with supplementals, BooklandEAN, ISSN, UCC Coupon Extended Code, Code 128, GS1-128, ISBT 128, Code 39, Code 39 Full ASCII, Trioptic Code 39, Code 32, Code 93, Code 11, Matrix 2 of 5, Interleaved 2 of 5, Discrete 2 of 5, Codabar, MSI, Chinese 2 of 5, GS1 DataBar variants, Korean 3 of 5, ISBT Concat Read the QR code type (2D): QR Code, PDF417, Data Matrix

Instructions for use:

Communication mode selection:

1. Please connect as shown 2. Connect a computer or device 3. Check if Device Manager can see one more keyboard device in Device Manager (only when set to USB mode)

.

4. Open the document detection, scan the QR code to detect whether it works normally.

Brand Story

1. Please connect as shown 2. Connect a computer or device 3. Check if the device manager can see that there is one more COM port device in the device manager (only when it is set to serial port mode). If it is not found, please install CH340 driver.

4.Open the serial port software, change the baud rate (default: 9600), scan the QR code to check whether it works normally.

Cableworks

Τεχνικές Προδιαγραφές

Brand:
OEM
MPN:
OEM
SFP28 (25G):

Cableworks

Ρωτήστε μας

Cableworks

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

Cableworks

BEST SELLERS