Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

1116.316
Ιntroductions: A battery holder is one or more compartments or chambers for holding a battery. For dry cells, the holder must also make electrical contact with the battery terminals. For wet cells, cables are often connected to the battery terminals, as is found in automobiles or emergency...
0.89
χωρίς ΦΠΑ 0.72
Μη Διαθέσιμο
1140.679
18650 Battery Holder Case with 6" leads for soldering / connecting. Takes 2 standard size 18650 batteries side by side to form a compact battery of 3.7V rechargeables Specification: Rivet Material: Nickel-plated Brass Plastic Material: Environmental protection pp
1.55
χωρίς ΦΠΑ 1.25
Σε Απόθεμα
+
1140.131
Fit for: 4 x 3.7V 18650 Battery  Battery Connect Type: In Parallel Total Size: 79 x 78 x 21mm/3.1" x 3" x 0.87"(L*W*H) Wire Length: 11cm/4.3"; Hole Dia: 3mm/0.12" Package Content: 1 x Battery Holder Case Main Color: Black Net Weight: 32g
2.68
χωρίς ΦΠΑ 2.16
Σε Απόθεμα
+
1140.128
Battery Type: 18650 Connection: Soldering Item size: 7.8 * 4 * 2.1cm / 3.1 * 1.6 * 0.8in Package List: 2 x 18650 parallel battery holder This item is battery case box holder. DIY power supply Easy installation You could use this case with your own battery to form power...
1.66
χωρίς ΦΠΑ 1.34
Σε Απόθεμα
+
1140.129
Type: Battery Holder Case Box Size: approx. 77mm x 58mm Battery Type: 18650 battery Material: ABS Exposed length: 120mm Wire material: 22AWG Suitable For 3 x 3.7V 18650 Battery Number of Cells: 3 Cell Instructions For use: Series
2.23
χωρίς ΦΠΑ 1.80
Μη Διαθέσιμο
1116.495
Material: Plastic and metal. Color:black. Size:5.5*2.1mm
1.34
χωρίς ΦΠΑ 1.08
Σε Απόθεμα
+
1140.130
Size: approx. 77mm x 80mm Battery Type: 18650 battery Material: ABS Exposed length: 120mm Wire material: 22AWG Suitable For 4 x 3.7V 18650 Battery Number of Cells: 4 Cell Instructions For use: Series
2.68
χωρίς ΦΠΑ 2.16
Σε Απόθεμα
+
1140.294
Specification Material:ABS Color:Black Instructions for use: 1 single 18650 battery use 3.7V.
0.83
χωρίς ΦΠΑ 0.67
Μη Διαθέσιμο
1116.315
Description : This battery holder can hold 6 AA battery which can make 9V battery pack from alkaline cells. It comes with a DC2.1 Powerjack which can plug to Arduino directly. Specifications Cell Quantity: 6 Battery type: AA Storage temperature: 25'C (77F,...
1.55
χωρίς ΦΠΑ 1.25
Μη Διαθέσιμο
1116.471
Support 2 Pcs of AAA battery to make 3V. 2 Pcs AA battery holder Case leads 1.5V x 2, 3V clip type for soldering Dimension : 5 x 2.5 x 1cm/ 1.9 x 0.9" x 0.3"(L*W*H) Cable Length( Each ) : 15cm/ 5.9"
0.78
χωρίς ΦΠΑ 0.63
Σε Απόθεμα
+
1140.680
Battery Type: 18650 battery Material: ABS Exposed length: 120mm Wire material: 22AWG Suitable For 3 x 3.7V 18650 Battery Number of Cells: 3 Cell Instructions For use: Parallel
2.12
χωρίς ΦΠΑ 1.71
Σε Απόθεμα
+
1116.834
Material: High Quality Plastic Hold 4 standard AA size batteries, either for alkalescent or rechargeable batteries Be used as a perfect external power source With On/Off switch Wire lead 15cm
1.34
χωρίς ΦΠΑ 1.08
Σε Απόθεμα
+
1116.738
Type: Battery Holder Case Box Size: approx. 75mm x 40mm Battery Type: 18650 battery (Not Included) Material: PP This battery holder can hold:18650 standard size 2 battery. Exposed length: 150mm Rivet material: Brass Nickel Plated Wire material: 26AWG Instructions For...
1.12
χωρίς ΦΠΑ 0.90
Σε Απόθεμα
+
1116.328
This is a 4xAA (1.5V each for 6V) Battery Clip ideally suited to connecting to 5.5mm DC sockets. The connector is ideally suited to powering a device like an Arduino.
1.50
χωρίς ΦΠΑ 1.21
Σε Απόθεμα
+
1116.317
18650 Battery Holder Case with 6" leads for soldering / connecting. Takes 2 standard size 18650 batteries side by side to form a compact battery of 3.7V rechargeables Specification: Rivet Material: Nickel-plated Brass Plastic Material: Environmental protection pp Exposed...
1.66
χωρίς ΦΠΑ 1.34
Σε Απόθεμα
+
1116.180
Material: High Quality Plastic Hold 4 standard AA size batteries, Be used as a perfect external power source
1.35
χωρίς ΦΠΑ 1.09
Σε Απόθεμα
+
1140.013
Made of hard ABS material, practical and durable. Lightweight, convenient to carry. Easy to install. You can use this case with your own battery to form power system supply. 12 volt battery holder with on / off power switch wire lead. Hold 8 standard AA size batteries, either...
1.98
χωρίς ΦΠΑ 1.60
Σε Απόθεμα
+
1140.319
Descripiton: Material:plastic Button Coin Battery Hoing Quantity:2 Feature: 2X CR2032 6V button cell battery holder Equipped with on/off switch
0.69
χωρίς ΦΠΑ 0.56
Σε Απόθεμα
+
1140.207
2xAA battery holder with cover and switch
1.12
χωρίς ΦΠΑ 0.90
Μη Διαθέσιμο
1116.884
Features: Battery type: 3*18650 Case Holder 18650 Battery Holder Case with wire leads for soldering / connecting Takes 3 standard size 18650 batteries side by side to form a compact battery of 3.7V rechargeable
1.34
χωρίς ΦΠΑ 1.08
Μη Διαθέσιμο
1140.681
Plain case - no protection circuit on board Connect pins or lead wires to configure the case into parallel or serial format as needed Not rated for flat top batteries. Use with button top only. You can use this case with your own battery to form power system supply Easy...
3.24
χωρίς ΦΠΑ 2.61
Σε Απόθεμα
+
1116.905
Type: Battery Holder Case Box Size: approx. 75mm x 40mm Battery Type: 18650 battery (Not Included) Material: PP This battery holder can hold:18650 standard size 2 battery. Rivet material: Brass Nickel Plated Wire material: 26AWG Instructions For use: placed 2 18650...
1.74
χωρίς ΦΠΑ 1.40
Σε Απόθεμα
+
1116.885
Features: Battery type: 4*18650 Case Holder 18650 Battery Holder Case with wire leads for soldering / connecting Takes 4 standard size 18650 batteries side by side to form a compact battery of 3.7V rechargeable
1.55
χωρίς ΦΠΑ 1.25
Σε Απόθεμα
+
1140.682
Plain case - no protection circuit on board Connect pins or lead wires to configure the case into parallel or serial format as needed Not rated for flat top batteries. Use with button top only. You can use this case with your own battery to form power system supply Easy...
2.46
χωρίς ΦΠΑ 1.98
Σε Απόθεμα
+
1140.477
Suitable for: 2 x 1.5 V AAA battery (not included) Size: 6.3 x 2.5 x 1.5 cm / 6.3 cm x 2.5 cm x 0.6 "(L W H) Cable length (each): 16 cm / 16 cm Material: Plastic, metal
0.83
χωρίς ΦΠΑ 0.67
Σε Απόθεμα
+
1140.220
Two AA battery holder with snaps to attach 9V battery clip wires. For general purpose electronic kits and projects. Holds two 1.5V AA batteries in series for 3V output With snaps for wire connections
0.56
χωρίς ΦΠΑ 0.45
Μη Διαθέσιμο
1140.356
Features: Battery type: 4*18650 Case Holder 18650 Battery Holder Case with wire leads for soldering / connecting Takes 4 standard size 18650 batteries side by side to form a compact battery of 3.7V rechargeable
1.55
χωρίς ΦΠΑ 1.25
Μη Διαθέσιμο
1140.479
Suitable for: 3 x 1.5 V AA battery (not included) Size: 7 x 4.8 x 1.8 cm / 7 x 4.8 x 1.8 cm "(L W H) Material: Plastic, metal
1.00
χωρίς ΦΠΑ 0.81
Σε Απόθεμα
+
1116.879
Battery type: Case Holder for 1 x AA Battery. AA Battery Holder Case with wire leads for soldering / connecting.
0.67
χωρίς ΦΠΑ 0.54
Σε Απόθεμα
+
1116.472
Hold 3 standard AAA size batteries, either for alkaline or rechargeable batteries Be used as a perfect external power source Size: 51.8x36.1x11.8mm
1.00
χωρίς ΦΠΑ 0.81
Σε Απόθεμα
+
1140.683
Plain case - no protection circuit on board Connect pins or lead wires to configure the case into parallel or serial format as needed Not rated for flat top batteries. Use with button top only. You can use this case with your own battery to form power system supply Easy...
2.23
χωρίς ΦΠΑ 1.80
Σε Απόθεμα
+
1140.478
Suitable for: 3 x 1.5 V AAA battery (not included) Size: 6.3 x 3.8 x 1.1 cm / 6.3 x 3.8 x 1.1 cm   "(L W H) Material: Plastic, metal
0.94
χωρίς ΦΠΑ 0.76
Σε Απόθεμα
+
Επόμενα 7 προϊόντα
Φίλτρα Φίλτρα