Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

PIR Motion Detector Module HC-SR501 for Arduino
Κωδικός Cableworks: 1116.082

BrandOEM MPNoem
2.46
χωρίς ΦΠΑ 1.98
Σε Απόθεμα
+
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί Cableworks;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

CABLEWORKS

Αναλυτική Παρουσίαση

  • Working voltage: DC5V to 20V
  • Static consumption: 65 microamps
  • Level output: 3.3V high, low 0V
  • Time delay: Adjustable (0.3 seconds to 18 seconds)
  • Blockade of the time: 0.2 seconds
  • Trigger: L can not be duplicated, H can be repeated, the default value of H
  • Sensing range: less than 120 degrees cone angle less than 7 m
  • Working temperature: -15 to +70 degrees
  • PCB Dimensions: 32 * 24mm ,screw pitch 28mm ,screw aperture 2mm, sensor lens Dimensions: (diameter): 23mm (default)
  • Material: Mixture

Features :

  • Automatic induction: when a person enters the sensing range of input high level, people leave the sensing range will automatically delay the closing high level. Low level output voltage.
  • Photosensitive control ( optional ): module reserve position, can be set to a photosensitive control, day or when light is strong not induction. A photosensitive control as optional features, the factory has not installed the photosensitive resistance. If necessary, please be purchased photosensitive resistance self installation.
  • Two triggers: L can not be repeated, H repeatable. Can jumper option, the default is H.
  • May not repeat trigger mode: induction output high level, delay time is over, the output will be automatically changes from high level to low level.
  • Repeatable trigger mode: induction output high level, the delay time period, if the body is in its sensing range, the output will always maintain a high level, until the people left after the delay will be the high level to low level ( induction module detects human body every time events will automatically postpone a delay time, and to the last active time delay starting point ).
  • Has a sensing block time ( default:0.2 seconds ): induction module in each of the first sensing output ( high level to low level ), can be followed by setting a blockade of the time, in this period of time the sensor does not receive any induction signal. This function can be achieved ( inductive output time and blocking time ) the interval operation, can be applied to interval detection products; at the same time this function can effectively suppress the load switching process in the various interference
  • Wide working voltage range: default working voltage of DC5V to 20V Micro power consumption.
  • Static current65 microamps, especially suitable for dry battery powered electrical products.
  • Outputs a high level signal: convenient and various types of circuit

Cableworks

Τεχνικές Προδιαγραφές

Brand:
OEM
MPN:
oem

Cableworks

Ρωτήστε μας

Cableworks

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

Cableworks

BEST SELLERS