Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

PWM 20A Dual USB Solar Panel Battery Regulator - Charge Controller 12V/24V
Κωδικός Cableworks: 1140.017

BrandOEM MPNOEM
7.01
χωρίς ΦΠΑ 5.65
Μη Διαθέσιμο
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί Cableworks;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

CABLEWORKS

Αναλυτική Παρουσίαση

Specifications:
• Rated Voltage: 12V 24V Auto
• Application: Solar System Controller
• Current: 20A
• With Timer
• Only For off-Grid PV Solar System.

 

Safety Instructions:

• 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
• 2.The battery cable should be as short as possible to minimize loss.
• 3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries.
• 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. 

 

Features:

• 1.Build-in industrial micro controller.
• 2.One-key setting,digital display,auto memory function.
• 3.Fully 4-stage PWM charge management.
• 4.Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections
• 5.Dual mosfet Reverse current protections ,low heat productions. 
 

System Connection:

• 1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
• 2.Connect the photovoltaic module to the regulator - plus and minus.
• 3.Connect the consumer to the charge regulator - plus and minus.
• The reverse order applies when deinstalling!
• An improper sequence order can damage the controller!
• Size: 133x70x32mm/5.2x2.7x1.3"

Note:

• Please allow 0-2mm error due to manual measurement.

Cableworks

Τεχνικές Προδιαγραφές

Brand:
OEM
MPN:
OEM
SFP28 (25G):

Cableworks

Ρωτήστε μας

Cableworks

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

Cableworks

BEST SELLERS