Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

80~260VAC 100A Voltage Current Power Energy Meter + Current Transformer with LCD (PZEM-061)
Κωδικός Cableworks: 1140.226

BrandOEM MPNPZEM-061
28.00
χωρίς ΦΠΑ 22.58
Μη Διαθέσιμο
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί Cableworks;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

CABLEWORKS

Αναλυτική Παρουσίαση

A. Function

  • Electrical parameter measurement function (voltage, current, active power, energy)
  • Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
  • Power alarm threshold preset function (can set power alarm threshold).
  • The reset function of energy key.
  • Store data when power off.
  • Large-screen LCD (display voltage, current, active power, energy at the same time)
  • Backlight function.

B. Appearance and Key function

I. Display Interface

Display interface is a large-screen LCD, it can display voltage, current, power, energy parameters at the same time.

II. Display format

  • Power: test range: 0~22kW
  • Within 1kW, the display format is 0.0~999.9W
  • Within 1kW~10kW, the display format is 1000~9999W
  • 10kW and above, the display format is 0.1~22.0kW.

2. Energy: test range: 0~9999kWh

  • Within 10KWh, the display format is 0~9999Wh;
  • 10kWh and above, the display format is 10~9999kWh.

3. Voltage: test range: 80~260V

  • Display format: 80~260V

4. Current: test range: 0~100A

  • Display format: 0.00~99.99A

III. Key

1. Backlight control

Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.

2. Reset energy

Step1: Long press the key for 5 seconds until the number in energy display window flash, then release the key.

Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. If you don’t want to clear, then long press the key for 5 seconds again until the number doesn’t flash, it means the energy value is not cleared and will exit the reset state.

3. Set power alarm threshold

Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state

Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operation over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.

Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0--22.0kw

C. Precautions

  1. This module is suitable for indoor, please do not use outdoor.
  2. Applied load should not exceed the rated power.
  3. Wiring order can’t be wrong.
  4. It can't be used for inverter.

D. Specification parameters

  • Working voltage: 80 ~ 260VAC
  • Test voltage: 80 ~ 260VAC
  • Rated power: 100A/22000W
  • Operating frequency: 45-65Hz
  • Measurement accuracy: 1.0 grade

Cableworks

Τεχνικές Προδιαγραφές

Brand:
OEM
MPN:
PZEM-061
SFP28 (25G):

Cableworks

Ρωτήστε μας

Cableworks

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

Cableworks

BEST SELLERS