Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

12V Digital LED Thermostat Thermometer Temperature Relay Control Module + NTC Sensor(W1209WK)
Κωδικός Cableworks: 1140.344

BrandOEM MPNOEM
10.53
χωρίς ΦΠΑ 8.49
Μη Διαθέσιμο
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί Cableworks;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

CABLEWORKS

Αναλυτική Παρουσίαση

Connect the power supply and the load power supply to the controller, this time above the measured temperature is displayed as red, the blue under it(blue or red) shows the desired set temperature, according to STC (+) C / F (-) to set the desired set temperature and so on, 3 seconds after setting the automatic confirmation return, then the controller automatically performs relay by setting off, the thermostat output 10A relay, to meet a variety of high-power load, make sure line correctly
Long press SET 5 seconds can be SET to enter the main menu, press on STC (+) C/F (-) switch P0 - P8,
When adjust P0 - P8 parameters, such as the need to adjust the P0, at the same time on STC (+) (-) C/F, P0 numerical flashing, hold by STC (+) C/F (-) adjustment, adjust after OK, again at the same time on STC (+) C/F (-) once confirmed, P1 - P8 also C/F mode conversion function
Press C/F key, show that F mode, press the C/F key again, shown as C model, the factory pattern for C, (note: if you have customers in the use of temperature error is big, may be you are F mode)
 
  • The control range: - 50 ~ 110 ℃
  • The input power: DC12V
  • Resolution: 9.9!Other paragraph 1 ℃ temperature 99.9 0.1 ℃
  • Measuring input: NTC (10 k0. 5%) waterproof type sensor
  • Temperature measuring accuracy: 0.1 ℃
  • Environmental requirements: - 10 ~ 60 ℃ humidity 20% to 85%
  • Back to the bad accuracy: 0.1 ℃
  • Refresh rate: 0.55
  • The machine power consumption: static current: 35 ma and current or less: ma 65 or less
  • High temperature protection: 0-110 ℃
  • Display type: 0.28 inches Three digital tube
  • 48 * 29 * 22 product appearance size (length * width * height)
  • Hole size: 46 * 27 (length * width)

Cableworks

Τεχνικές Προδιαγραφές

Brand:
OEM
MPN:
OEM
SFP28 (25G):

Cableworks

Ρωτήστε μας

Cableworks

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

Cableworks

BEST SELLERS