Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

1Kg eSun Black ePLA-Gloss 1.75mm
Κωδικός Cableworks: 1212.104

BrandeSUN MPNBlack ePLA-Gloss 1.75mm
19.90
χωρίς ΦΠΑ 16.05
Μη Διαθέσιμο
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί Cableworks;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

CABLEWORKS

Αναλυτική Παρουσίαση

eSUN 3D Printer Filament ePLA-Gloss 1.75mm Dimensional Accuracy +/- 0.03mm 1KG (2.2 LBS) Spool 3D Printing Material For 3D Printers

Brand: ESUN
Material :Polylactic Acid
Colour :B-gloss Black
Item weight :1 Kilograms

Features

  • 【Gloss PLA】Shiny bright printed surface and little laminated striation, supporting structure is easy to peel off. Gloss PLA has higher toughness, not easy to break. Printing speed is faster than ABS, PC, PA and other material, low shrinkage, no deformation, no cracking.
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.
  • 【High Compatibility】Gloss PLA is improved and upgraded based on Ordinary PLA, keep all the advantages of PLA, easy to print just like ordinary PLA, eco-friendly and non-toxic. Widly used in accessory, home decoration, toy, sculpture, shell and COSPLAY.
  • 【Environmental Friendly】Scrap is reused to produce recyclable spool and packaging box. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.
Filament Properties Table
 3D PRINTING FILAMENT ePLA
 Density(g/cm3) 1.26
 Heat Distortion Temp(℃,0.45MPa) 56.70
5/10
  Melt Flow Index(g/10min) 3.3(190℃/2.16kg)
 Tensile Strength(MPa) 64.51
7/10
 Elongation at Break(%) 31.54
3/10
 Flexural Strength(MPa) 68.99
7/10
  Flexural Modulus(MPa) 1514.78
2/10
 IZOD Impact Strength(kJ/㎡) 7.9
1/10
 Durability 4/10
 Printability 9/10
 Extruder Temperature(℃) 190 - 230℃
推荐温度210℃
 Bed temperature(℃) 60°C
 Fan Speed 100%
 Printing Speed 40 - 100mm/s
 Heated Bed 可选       Optional
 Recommended Build Surfaces 美纹纸,PVP固体胶,PEI
 

Cableworks

Τεχνικές Προδιαγραφές

Brand:
eSUN
MPN:
Black ePLA-Gloss 1.75mm
SFP28 (25G):

Cableworks

Ρωτήστε μας

Cableworks

Αξιολογήσεις

Δε βρέθηκαν αξιολογήσεις

  • QoS
  • Νομοθεσία

Cableworks

BEST SELLERS