3D Printers/CNC/Laser

1Kg eSun Black PLA+ 1.75mm

ΚΩΔΙΚΟΣ: 1212.006

1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...

BrandeSUN

€19.90

χωρίς ΦΠΑ €16.05

Σε Απόθεμα

+ −

StaticBoards Ramps 1.4 SB Premium Board

ΚΩΔΙΚΟΣ: 1200.002

RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...

BrandSTATICBOARDS

€18.60

χωρίς ΦΠΑ €15.00

Σε Απόθεμα

+ −

10cm Original Capricorn PTFE (Teflon) 1.9x4mm

ΚΩΔΙΚΟΣ: 1140.250

***ΤΟ ΜΕΓΙΣΤΟ ΜΗΚΟΣ ΣΕ ΣΥΝΕΧΟΜΕΝΟ CAPRICORN ΕΙΝΑΙ ΜΕΧΡΙ ΕΝΑ ΜΕΤΡΟ*** Your extruder system has a finite amount of pushing force. You want as much as possible of that pushing force to be used to generate pressure in your HotEnd, as it’s what causes the molten filament to actually extrude...

BrandCAPRICORN

€2.50

χωρίς ΦΠΑ €2.02

Μη Διαθέσιμο

PC4-M10 Male Straight Pneumatic PTFE Tube Push Fit

ΚΩΔΙΚΟΣ: 1215.371

PTFE Tubing Outer Diameter: 4 mm. Thread: 10mm The upper part(black) can be inserted 4mm PTFE tube and self-locking Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life

BrandOEM

€1.23

χωρίς ΦΠΑ €0.99

Μη Διαθέσιμο

3D Printer A4988 Reprap Stepper Motor Driver Module

ΚΩΔΙΚΟΣ: 1116.078

A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...

BrandOEM

€3.92

χωρίς ΦΠΑ €3.16

Σε Απόθεμα

+ −

1Kg eSun White PLA+ 1.75mm

ΚΩΔΙΚΟΣ: 1212.014

1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...

BrandeSUN

€19.90

χωρίς ΦΠΑ €16.05

Μη Διαθέσιμο

DRV8825 Stepper Driver Module with Heatsink for Arduino

ΚΩΔΙΚΟΣ: 1116.117

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...

BrandOEM

€6.20

χωρίς ΦΠΑ €5.00

Σε Απόθεμα

+ −

Original E3D V6 Silicone Sock

ΚΩΔΙΚΟΣ: 1134.014

Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...

BrandE3D

€2.50

χωρίς ΦΠΑ €2.02

Μη Διαθέσιμο

1Kg eSun Cold White PLA+ 1.75mm

ΚΩΔΙΚΟΣ: 1212.036

1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...

BrandeSUN

€19.90

χωρίς ΦΠΑ €16.05

Μη Διαθέσιμο

5v DC Cooling Fan 5015 for Nozzle

ΚΩΔΙΚΟΣ: 1116.771

Rated Voltage : DC 5V Current : 0.14A Bearing Type : Sleeve Bearing Speed : 4000 RPM Air Flow : 4.21CFM Noise : 30dbA Blade Material : Thermo Plastic UL94V-0 PBT Housing Material : Thermo Plastic UL PBT Color : Black Connector : 2 Pins JST PH...

BrandOEM

€2.91

χωρίς ΦΠΑ €2.35

Σε Απόθεμα

+ −

LJ12A3-4-Z/BX 6V-36V Inductive Proximity Sensor Switch for 3D Printer/CNC

ΚΩΔΙΚΟΣ: 1116.454

Model: LJ12A3-4-Z/BX Wire Type Cylindrical DC 3 Wire Type Switch Appearance Type Cylinder Type Theory Inductive Sensor Output Type NPN NO(Normal Open) Specs : Diameter of Head : 12mm Detecting Distance : 4mm Supply Voltage : DC 6-36V Current Output : 300mA...

BrandOEM

€5.59

χωρίς ΦΠΑ €4.51

Σε Απόθεμα

+ −

TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller

ΚΩΔΙΚΟΣ: 1116.340

Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...

BrandOEM

€11.20

χωρίς ΦΠΑ €9.03

Σε Απόθεμα

+ −

1Kg eSun Solid Black PETG 1.75mm

ΚΩΔΙΚΟΣ: 1212.020

Product features 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white,...

BrandeSUN

€23.99

χωρίς ΦΠΑ €19.35

Σε Απόθεμα

+ −

Flexible Coupling Coupler /Shaft 5x8x25 mm

ΚΩΔΙΚΟΣ: 1116.748

3D printer Stepper Motor Flexible Coupling Coupler Size: 5 mm*8mm**25 mm

BrandOEM

€2.68

χωρίς ΦΠΑ €2.16

Σε Απόθεμα

+ −

Nema 17 Wantai Stepper Motor,42BYGHW811L20P1-X2, 4800g.cm,2.5A, Flat Shaft 3D Reprap Printer (CE,ROSH,ISO)

ΚΩΔΙΚΟΣ: 1140.001

Part No.: 42BYGHW811L20P1-X2 Frame Size: NEMA17 Step Angle: 1.8 degree Voltage: 3.1 V Current: 2.5 A/phase Resistance: 1.25 Ohm/phase Inductance: 1.8 mH/phase Holding torque: 4800g-cm Rotor inertia: 68 g-cm2 Number of wire leads: 4 Weight:...

BrandWANTAI

€13.64

χωρίς ΦΠΑ €11.00

Σε Απόθεμα

+ −

Arduino Nano CNC Shield V4 - Stepper Motor Driver for Arduino (GRBL Compatible)

ΚΩΔΙΚΟΣ: 1116.971

This 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each...

BrandOEM

€7.73

χωρίς ΦΠΑ €6.23

Σε Απόθεμα

+ −

1Kg eSun Silver PLA+ 1.75mm

ΚΩΔΙΚΟΣ: 1212.010

1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...

BrandeSUN

€19.90

χωρίς ΦΠΑ €16.05

Μη Διαθέσιμο

Teflon PTFE Tube 2x4mm

ΚΩΔΙΚΟΣ: 1116.757

Inside Diameter: 2mm Outside Diameter: 4mm Length: 1m Material: Teflon PTFE

BrandOEM

€2.01

χωρίς ΦΠΑ €1.62

Μη Διαθέσιμο

100K ohm NTC 3950 Thermistors with cable for 3D Printer Reprap

ΚΩΔΙΚΟΣ: 1116.752

This is pre–wired thermistor for RepRap 3D Printer extruder or heated bed, for your convenience, it is also equipped with 2 pin connector to mate with RepRap electronics (RAMPS 1.4, Sangunolulu etc) NTC 3950 Thermistor features: Thermistor temperature value table for Marlin...

BrandOEM

€1.66

χωρίς ΦΠΑ €1.34

Μη Διαθέσιμο

Original Prusa i3 MK2/S to MK2.5 upgrade kit with Smooth double-sided PEI Steel Sheet

ΚΩΔΙΚΟΣ: 1145.025

We are aware of that the full upgrade from Original Prusa i3 M2/S to MK3 is a little bit pricey, so we came up with the second best option - the MK2.5 upgrade. It gives you the best features of magnetic bed with spring steel sheet, whole new extruder head with Bondtech and Noctua fans goodness...

BrandPRUSA RESEARCH

€99.20

χωρίς ΦΠΑ €80.00

Σε Απόθεμα

+ −

Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)

ΚΩΔΙΚΟΣ: 1134.001

The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...

BrandE3D

€86.80

χωρίς ΦΠΑ €70.00

Μη Διαθέσιμο

1pcs 0.4mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament

ΚΩΔΙΚΟΣ: 1116.939

1pcs 0.4mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament

BrandOEM

€1.13

χωρίς ΦΠΑ €0.91

Μη Διαθέσιμο

1Kg eSun Fire Engine Red PLA+ 1.75mm

ΚΩΔΙΚΟΣ: 1212.045

1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...

BrandeSUN

€19.90

χωρίς ΦΠΑ €16.05

Μη Διαθέσιμο

1Kg eSun Gold PLA+ 1.75mm

ΚΩΔΙΚΟΣ: 1212.011

1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...

BrandeSUN

€19.90

χωρίς ΦΠΑ €16.05

Σε Απόθεμα

+ −