ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Build it yourself

Ταξινόμηση:
Αλφαβητικά - Ω ως Α
128
Ροδέλα DIN9021 M10 (10 τμχ)
1021.170
Ροδέλα DIN9021 M10 (10 τμχ)
€0.95
χωρίς ΦΠΑ €0.77
Σε Απόθεμα
+ −
Ροδέλα DIN125 M8 (20 τμχ)
1021.173
Ροδέλα DIN125 M8 (20 τμχ)
€0.35
χωρίς ΦΠΑ €0.28
Σε Απόθεμα
+ −
Ροδέλα DIN125 M10 (10 τμχ)
1021.172
Ροδέλα DIN125 M10 (10 τμχ)
€0.35
χωρίς ΦΠΑ €0.28
Σε Απόθεμα
+ −
Παξιμάδι ασφαλείας DIN985 Μ3 (10 τμχ)
1021.159
Παξιμάδι ασφαλείας DIN985 Μ3 (10 τμχ)
€0.25
χωρίς ΦΠΑ €0.20
Μη Διαθέσιμο
Παξιμάδι DIN934 M8 (10 τμχ)
1021.175
Παξιμάδι DIN934 M8 (10 τμχ)
€0.27
χωρίς ΦΠΑ €0.22
Μη Διαθέσιμο
Παξιμάδι DIN934 M10 (10 τμχ)
1021.176
Παξιμάδι DIN934 M10 (10 τμχ)
€0.62
χωρίς ΦΠΑ €0.50
Μη Διαθέσιμο
Παξιμάδι DIN562 M3 7x7 (10 τμχ)
1021.157
Παξιμάδι DIN562 7x7 (10 τμχ)
€0.12
χωρίς ΦΠΑ €0.10
Μη Διαθέσιμο
Παξιμάδι DIN562 M3 5.5x5.5 (10 τμχ)
1021.158
Παξιμάδι DIN562 M3 5.5x5.5 (10 τμχ)
€0.12
χωρίς ΦΠΑ €0.10
Μη Διαθέσιμο
Μ6 DIN912 Headless Hex screw for 3030/4040 Corners
1140.896
d:6mm L:8mm dz:4mm s:3mm t:2mm Thread Pitch:1mm
€0.11
χωρίς ΦΠΑ €0.09
Σε Απόθεμα
+ −
Μ4 DIN912 Headless Hex screw for 2020 Corners
1140.895
d:4mm L:6mm dz:2.5mm s:2mm t:1.5mm Thread Pitch:0.7mm  
€0.07
χωρίς ΦΠΑ €0.06
Σε Απόθεμα
+ −
Βίδα M3 50mm - Σταυρός (Stainless Steel Screw M3x50 Round head)
1140.968
Drive Style: Phillips Head Style: Round Stainless Steel
€0.14
χωρίς ΦΠΑ €0.11
Σε Απόθεμα
+ −
Βίδα M3 45mm - Σταυρός (Stainless Steel Screw M3x45 Round head)
1140.967
Drive Style: Phillips Head Style: Round Stainless Steel
€0.12
χωρίς ΦΠΑ €0.10
Σε Απόθεμα
+ −
Βίδα M3 40mm - Σταυρός (Stainless Steel Screw M3x40 Round head)
1140.966
Drive Style: Phillips Head Style: Round Stainless Steel
€0.11
χωρίς ΦΠΑ €0.09
Σε Απόθεμα
+ −
Βίδα M3 35mm - Σταυρός (Stainless Steel Screw M3x35 Round head)
1140.965
Drive Style: Phillips Head Style: Round Stainless Steel
€0.10
χωρίς ΦΠΑ €0.08
Σε Απόθεμα
+ −
Βίδα M3 30mm - Σταυρός (Stainless Steel Screw M3x30 Round head)
1140.964
Drive Style: Phillips Head Style: Round Stainless Steel
€0.10
χωρίς ΦΠΑ €0.08
Σε Απόθεμα
+ −
Βίδα M3 25mm - Σταυρός (Stainless Steel Screw M3x25 Round head)
1140.963
Drive Style: Phillips Head Style: Round Stainless Steel
€0.09
χωρίς ΦΠΑ €0.07
Σε Απόθεμα
+ −
Βίδα M3 20mm - Σταυρός (Stainless Steel Screw M3x20 Round head)
1140.962
Drive Style: Phillips Head Style: Round Stainless Steel
€0.09
χωρίς ΦΠΑ €0.07
Σε Απόθεμα
+ −
Βίδα M3 16mm - Σταυρός (Stainless Steel Screw M3x16 Round head)
1140.961
Drive Style: Phillips Head Style: Round Stainless Steel
€0.07
χωρίς ΦΠΑ €0.06
Σε Απόθεμα
+ −
Βίδα DIN912 Αλλεν Μ3 50mm (20 τμχ)
1021.169
Βίδα DIN912 Αλλεν Μ3 50mm (20 τμχ)
€6.94
χωρίς ΦΠΑ €5.60
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 45mm (20 τμχ)
1021.168
Βίδα DIN912 Αλλεν Μ3 45mm (20 τμχ)
€6.08
χωρίς ΦΠΑ €4.90
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 40mm (20 τμχ)
1021.166
Βίδα DIN912 Αλλεν Μ3 40mm (20 τμχ)
€4.17
χωρίς ΦΠΑ €3.36
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 35mm (20 τμχ)
1021.167
Βίδα DIN912 Αλλεν Μ3 35mm (20 τμχ)
€2.98
χωρίς ΦΠΑ €2.40
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 30mm (20 τμχ)
1021.165
Βίδα DIN912 Αλλεν Μ3 30mm (20 τμχ)
€2.60
χωρίς ΦΠΑ €2.10
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 25mm (20 τμχ)
1021.161
Βίδα DIN912 Αλλεν Μ3 20mm (20 τμχ)
€2.01
χωρίς ΦΠΑ €1.62
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 20mm (20 τμχ)
1021.164
Βίδα DIN912 Αλλεν Μ3 20mm (20 τμχ)
€1.91
χωρίς ΦΠΑ €1.54
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 16mm (20 τμχ)
1021.163
Βίδα DIN912 Αλλεν Μ3 16mm (20 τμχ)
€1.86
χωρίς ΦΠΑ €1.50
Μη Διαθέσιμο
Βίδα DIN912 Αλλεν Μ3 10mm (20 τμχ)
1021.162
Βίδα DIN912 Αλλεν Μ3 10mm (20 τμχ)
€1.49
χωρίς ΦΠΑ €1.20
Μη Διαθέσιμο
Zinc Alloy Hinge for 2020 Aluminum Extrusion
1140.891
Zinc Alloy Hinge for 2020 Aluminum Extrusion Used as Inside Corner Joint for European standard 2020 Series Aluminum Profile
€1.12
χωρίς ΦΠΑ €0.90
Σε Απόθεμα
+ −
VNH2SP30 30A Stepper Motor Driver module for Arduino
1215.784
Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown
€11.76
χωρίς ΦΠΑ €9.48
Σε Απόθεμα
+ −
V-Slot Plate with V-Rail Wheel for extrusion profile (20-80mm)
1256.468
Material : Aluminum alloy Plate size : T3x88x127mm Apply to : 2020,2040,2080 v-slot aluminum profile
€29.13
χωρίς ΦΠΑ €23.49
Σε Απόθεμα
+ −
V-Slot Plate with V-Rail Wheel for 2020 extrusion profile
1215.730
Material : Aluminum alloy Plate size : T6mmx50mmx50mm Apply to : 2020 v-slot aluminum profile
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
Upgraded Universal Extruder Kit for Makerbot MK8 Extruder
1140.228
Applies to 1.75MM filament Quick Coupler Fittings of PC4-M5, 4*2 Teflon feed tube The extruder supports both short and long distance feeding
€6.72
χωρίς ΦΠΑ €5.42
Σε Απόθεμα
+ −
Upgrade V-Slot Profile X Y-axis Synchronous Belt Stretch Straighten Tensioner For Creality CR10 CR10S 3D Print
1256.614
Product Name: 2020 aluminum profile X-axis synchronous belt stretching Surface treatment:anodizing Color:Black Material:aluminum alloy
€10.66
χωρίς ΦΠΑ €8.60
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-500mm with Brass Nut, Lead 8mm - Pitch 2mm
1116.778
Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:2mm Lead of thread:8mm Length:500mm
€10.55
χωρίς ΦΠΑ €8.51
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-400mm with Brass Nut, Lead 8mm - Pitch 2mm
1116.777
Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:2mm Lead of thread:8mm Length:400mm
€9.16
χωρίς ΦΠΑ €7.39
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-350mm with Brass Nut, Lead 8mm - Pitch 2mm
1116.775
Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:8mm Lead of thread:8mm Length:350mm
€8.33
χωρίς ΦΠΑ €6.72
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-300mm with Brass Nut, Lead 8mm - Pitch 2mm
1116.776
Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:2mm Lead of thread:8mm Length:300mm
€6.39
χωρίς ΦΠΑ €5.15
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-1200mm (1.2m) with Brass Nut, Lead 8mm - Pitch 2mm
1140.083
Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:8mm Lead of thread:8mm Length:1200mm (1.2 meters)
€25.09
χωρίς ΦΠΑ €20.23
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-1000mm (1m) with Brass Nut, Lead 8mm - Pitch 2mm
1140.700
Material: Stainless steel Diameter: 8 mm Lead: 8mm Thread Pitch: 2 mm Length: 1000 mm
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
TMC2209 Stepper Motor Driver v2.0
1256.230
Features: Ultra quiet Large heat sink,good heat dissipation Support sensorless-homing function. Support uart mode by set jumper caps instead of welding on mks gen L V2.0,skr1.3/1.4,mks sgen L. Parameter: Default current:0.88a Recommend current:1.72a(at most)...
€8.41
χωρίς ΦΠΑ €6.78
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
TL-Smoother Filter Addon Module For 3D Printer Stepper Motor
1215.378
Lower vibration lower noise smoother result TheTL-Smoother is an addon module for 3D printer stepper motor drivers. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers. The board provides flyback diodes...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
TL-Smoother Filter Module For 3D Printer Stepper Motor
1215.731
Lower vibration lower noise smoother result TheTL-Smoother is an addon module for 3D printer stepper motor drivers. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers. The board provides flyback diodes...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
Tempered Glass 214x214x3mm for HeatBeds
1116.962
3D Printer Heating Bed Reprap Toughened Glass Plate   214*214*3mm   Suitable for heating circuit board of reprap machine   Specifications: Size:   214*214*3mm Material: Toughened glass Color: Transparent   Features: High...
€8.38
χωρίς ΦΠΑ €6.76
Σε Απόθεμα
+ −
Teflon PTFE Tube 2x4mm
1116.757
Inside Diameter: 2mm Outside Diameter: 4mm Length: 1m Material: Teflon PTFE
€2.01
χωρίς ΦΠΑ €1.62
Μη Διαθέσιμο
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
T8 Brass nut
1116.779
This T8 Brass nut is machined to fit T8 lead screws. It features an 8mm diameter x 2mm pitch threading and has 4 external mounting points for attaching the screw to the moveable portion of your project. The nut measures 22.25mm in diameter x 15.75mm in length.  
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
T sliding Fastener Bracket for 3030 Aluminum Profile
1140.898
Material: Carbon steel (galvanized) Screw hole: M6
€2.47
χωρίς ΦΠΑ €1.99
Σε Απόθεμα
+ −
T sliding Fastener Bracket for 2020 Aluminum Profile
1140.897
Material: Carbon steel (galvanized) Screw hole: M5
€1.69
χωρίς ΦΠΑ €1.36
Σε Απόθεμα
+ −
T Type Shape Joint Plate for 3030 Aluminum Profile
1256.451
T Type Shape Joint Plate for 3030 Aluminum Profile
€1.69
χωρίς ΦΠΑ €1.36
Σε Απόθεμα
+ −
T Type Shape Joint Plate for 2020 Aluminum Profile
1256.450
T Type Shape Joint Plate for 3030 Aluminum Profile
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
Swiss Clips for Heated Beds
1134.016
// <!--[CDATA[ var require = { "baseUrl": "https://e3d-online.com/static/version1507640287/frontend/E3donline/default/en_US" }; // ]]-->// <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...
€0.81
χωρίς ΦΠΑ €0.65
Μη Διαθέσιμο
SUNON MF40201VX-1000U-G99 12V 40x40x20 Fan
1021.447
SPECIFICATION Manufacturer SUNON Type of fan DC Kind of fan axial Operating voltage 4.5...13.8V Fan dimensions 40x40x20mm Power...
€6.94
χωρίς ΦΠΑ €5.60
Μη Διαθέσιμο
Sunon MF40100V1-G99-A 5V 40x40x10 Fan (MK3 Compatible)
1215.002
Χωρίς Ακροδέκτες   Manufacturer SUNON Type of fan DC Kind of fan axial Supply voltage 5V DC Operating voltage 3.5...6V Fan dimensions 40x40x10mm Power consumption 0.83W Current rating 0.138A Fan efficiency 13.52m3/h Noise level 27.3dBA
€6.15
χωρίς ΦΠΑ €4.96
Μη Διαθέσιμο
SUNON EE40101S1-1000U-999 12V 40x40x10 Fan
1021.446
SPECIFICATION Manufacturer SUNON Type of fan DC Kind of fan axial Operating voltage 4.5...13.8V Fan dimensions 40x40x10mm Power...
€3.60
χωρίς ΦΠΑ €2.90
Μη Διαθέσιμο
Stepper Motor Dampener - Shock Absorber
1215.979
Description: Product Name: Vibration Damper It can effectively reduce shock, sed for reducing 3D printer stepper motor noise and vibration Suitable for 42 Stepper Motor/3D Printer Motor/MEMA 17 Stepper Material: Aluminium Alloy Size:52x35x5mm
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
Stepper Motor 17HS4023 42*42*23mm for Titan Extruder
1215.377
  Size:42*42*23mm Phase: 2 Phase Voltage: 12V Current: 0.7 A/Phase Resistance: 4.0 plusmn 10%Omega/Phase Inductance: 3.2 plusmn 20% mH/Phase Holding Togque: 14 N.cm Insulation Class: B
€12.31
χωρίς ΦΠΑ €9.93
Σε Απόθεμα
+ −
StaticBoards Ramps 1.4 SB Premium Board
1200.002
RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...
€18.60
χωρίς ΦΠΑ €15.00
Σε Απόθεμα
+ −
Stainless Steel Throat with Teflon Tube for 1.75mm Filament
1116.947
Stainless Steel V6 Throat with Teflon Tube for 1.75mm Filament Length: 22mm
€1.79
χωρίς ΦΠΑ €1.44
Σε Απόθεμα
+ −
Stainless Steel Throat with Slot M6x30mm for Makerbot MK8
1140.185
Stainless Steel Throat with Slot M6x30mm for Makerbot MK8 1.75mm Filament
€3.36
χωρίς ΦΠΑ €2.71
Σε Απόθεμα
+ −
Stainless Steel Throat with Slot M6x26mm for Makerbot MK8
1140.183
Stainless Steel Throat with Slot M6x26mm for Makerbot MK8 1.75mm Filament
€3.01
χωρίς ΦΠΑ €2.43
Σε Απόθεμα
+ −
Stainless Steel Throat M6x50mm for Makerbot MK8
1140.187
Stainless Steel Throat M6x50mm for Makerbot MK8 1.75mm Filament
€2.34
χωρίς ΦΠΑ €1.89
Σε Απόθεμα
+ −
Stainless Steel Throat M6x40mm for Makerbot MK8
1140.186
Stainless Steel Throat M6x40mm for Makerbot MK8 1.75mm Filament
€3.36
χωρίς ΦΠΑ €2.71
Σε Απόθεμα
+ −
Stainless Steel Throat for 1.75mm Filament
1116.946
Stainless Steel V6 Throat for 1.75mm Filament
€2.91
χωρίς ΦΠΑ €2.35
Σε Απόθεμα
+ −
Solid V Wheel (without bearing)
1116.780
Solid V Wheel (without bearing)
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
SK12 Shaft Support Linear Rail Vertical Bearings Shaft Guide Support Bracket
1116.911
Description: SK12 Shaft Support Linear Rail Vertical Bearings Shaft Guide Support Bracket Specification: Model: SK12 Shaft ID: 12mm Size: Approx. 42x14x37.5mm Hole Diameter: Approx. 5.5mm Holes Centre Distance: Approx. 32mm Material: Steel Net Weight: 28g
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
Single Side Adhesive foam Tape (3mm x 100mm x 4m)
1256.465
Material: PE Foam Substrate Color: Black Thickness: 3mm Width: 100mm Length: 4 M
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
SilentStepStick Tester
1201.003
Product description With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board, e.g. on a Ramps like the photo shows. The tester is...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
SHF12 Linear Bearing Rod Rail Horizontal Shaft Support
1116.910
SHF12 12mm Linear Bearing Rod Rail Horizontal Shaft Support
€2.50
χωρίς ΦΠΑ €2.02
Σε Απόθεμα
+ −
SHF10 Linear Bearing Rod Rail Horizontal Shaft Support
1140.174
SHF10 10mm Linear Bearing Rod Rail Horizontal Shaft Support
€1.79
χωρίς ΦΠΑ €1.44
Σε Απόθεμα
+ −
SCS8UU Metal 8mm Linear Ball Bearing Motion Bearing For CNC
1140.070
Specification: Material: Steel,Aluminum Model: SC8UU Shaft ID: 8mm Weight: 187G Inner Diameter:8mm Features : The universal Ball Bearings is great for you to replace the damaged Ball Bearings in your devices to improve them efficiency and save energy. Widely...
€2.69
χωρίς ΦΠΑ €2.17
Σε Απόθεμα
+ −
SCS8LUU Metal 8mm Linear Ball Bearing - Motion Bearing For CNC
1116.980
8mm Linear Motion Bearing Long – SC8LUU Specifications For 8mm linear railings Dynamic Load rating: 410 N Static Load rating: 800 N Four ball races
€3.58
χωρίς ΦΠΑ €2.89
Σε Απόθεμα
+ −
SCS12UU Metal 12mm Linear Ball Bearing - Motion Bearing For CNC
1116.975
Specification: Material: Steel,Aluminum Model: SC12UU Shaft ID: 12mm Weight: 187G Inner Diameter:12mm Features : The universal Ball Bearings is great for you to replace the damaged Ball Bearings in your devices to improve them efficiency and save energy. Widely used in home appliances,...
€4.96
χωρίς ΦΠΑ €4.00
Σε Απόθεμα
+ −
SCS12LUU Linear Ball Bearing (block) Extra Long
1140.691
Specifications: Type: SCS12LUU Material : Steel, Aluminum Inner Diameter: 12mm Features: Universal Ball Bearings are great for replacing damaged Ball Bearings in your devices to improve their efficiency and conserve energy. Widely used in home and industrial...
€7.84
χωρίς ΦΠΑ €6.32
Σε Απόθεμα
+ −
Round Head Hex Black M5 Screws M5*35mm
1256.637
Round Head Hex Black M5 Screws M5*35mm
€0.26
χωρίς ΦΠΑ €0.21
Σε Απόθεμα
+ −
Right MK10/Makerbot Extruder Feed Device Part For 3D Printer - 1.75mm Filament
1140.010
Features: Used for 1.75mm filament, Reprap, Makerbot. Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be...
€5.82
χωρίς ΦΠΑ €4.69
Σε Απόθεμα
+ −
RatRig - OpenBuilds V-Slot Gantry Plate (20mm)
1238.011
V-Slot Gantry Plate (20mm) - 20mm - This plate was designed to be used when a smaller, lighter plate is desired on the 20mm side of V-Slot. This plate is great when full size wheels are preferred along with a smaller foot print needed. We want to ensure that we simplify belt clamping so we...
€6.52
χωρίς ΦΠΑ €5.26
Σε Απόθεμα
+ −
RatRig - OpenBuilds Mini V Gantry Plate
1238.010
This is the awesome little plate for the Mini V linear guide system using the OpenBuilds Mini V Wheels and the Xtreme Mini V Wheels. It's super strong and has a small form factor. This plate has the mounting pattern to allow for end to end mounting that makes up the Mini V system. This opens...
€9.72
χωρίς ΦΠΑ €7.84
Σε Απόθεμα
+ −
RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega
1140.835
Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...
€7.96
χωρίς ΦΠΑ €6.42
Σε Απόθεμα
+ −
Prusa i3 MK8 aluminum extruder kit - Right Hand
1116.961
Feature: MK8 extruder aluminum block DIY kit 3 type for your choice, Type 1 (right hand), Type 2 (left hand) and Type 3 (normal), please select the one you need. Reduce the wiredrawing problem when working for remote feeding Specifications: Model: MK8 Material: Aluminum-alloy 3 type to...
€6.39
χωρίς ΦΠΑ €5.15
Σε Απόθεμα
+ −
Prusa i3 MK8 aluminum extruder kit - Left Hand
1116.960
Feature: MK8 extruder aluminum block DIY kit 3 type for your choice, Type 1 (right hand), Type 2 (left hand) and Type 3 (normal), please select the one you need. Reduce the wiredrawing problem when working for remote feeding Specifications: Model: MK8 Material: Aluminum-alloy...
€5.16
χωρίς ΦΠΑ €4.16
Σε Απόθεμα
+ −
Plexiglass 50cm x 50cm x 2.6mm - Ακρυλικό Φύλλο 50x50 (Clear)
1215.088
Χρώμα : Διάφανο Διαστάσεις : 50x50cm Πάχος : 2.6mm
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
Plexiglass 50cm x 50cm x 2.6mm - Ακρυλικό Φύλλο 50x50 (Black)
1215.089
Χρώμα : Μαύρο Διαστάσεις : 50x50cm Πάχος : 2.6mm
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
Plexiglass 50cm x 50cm x 2.6mm - Ακρυλικό Φύλλο 50x50 (White)
1215.090
Χρώμα : Άσπρο Διαστάσεις : 50x50cm Πάχος : 2.6mm 
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
Plexiglass 30cm x 40cm x 2.6mm - Ακρυλικό Φύλλο 30x40 (Μαύρο)
1215.072
Χρώμα : Μαύρο Διαστάσεις : 30x40cm Πάχος : 2.6mm
€9.42
χωρίς ΦΠΑ €7.60
Μη Διαθέσιμο
Plexiglass 30cm x 40cm x 2.6mm - Ακρυλικό Φύλλο 30x40 (Άσπρο)
1215.071
Χρώμα : Άσπρο Διαστάσεις : 30x40cm Πάχος : 2.6mm 
€8.95
χωρίς ΦΠΑ €7.22
Σε Απόθεμα
+ −
Plexiglass 30cm x 40cm x 2.6mm - Ακρυλικό Φύλλο 30x40 (Διάφανο)
1215.070
Χρώμα : Διάφανο Διαστάσεις : 30x40cm Πάχος : 2.6mm 
€9.42
χωρίς ΦΠΑ €7.60
Σε Απόθεμα
+ −
Plexiglass 20cm x 20cm x 2.6mm - Ακρυλικό Φύλλο 20x20x (Άσπρο)
1215.065
Χρώμα : Άσπρο Διαστάσεις : 20x20cm Πάχος : 2.6mm 
€4.75
χωρίς ΦΠΑ €3.83
Σε Απόθεμα
+ −
Plexiglass 20cm x 20cm x 2.6mm - Ακρυλικό Φύλλο 20x20 (Μαύρο)
1215.066
Χρώμα : Μαύρο Διαστάσεις : 20x20cm Πάχος : 2.6mm 
€4.75
χωρίς ΦΠΑ €3.83
Σε Απόθεμα
+ −
Plexiglass 20cm x 20cm x 2.6mm - Ακρυλικό Φύλλο 20x20 (Διάφανο)
1215.064
Χρώμα : Διάφανο Διαστάσεις : 20x20cm Πάχος : 2.6mm 
€4.75
χωρίς ΦΠΑ €3.83
Σε Απόθεμα
+ −
Plexiglass 15cm x 15cm x 2.6mm - Ακρυλικό Φύλλο 15x15(Clear)
1215.067
Χρώμα : Διάφανο  Διαστάσεις : 15x15cm Πάχος : 2.6 mm Προέλευση : Κίνα
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Plexiglass 15cm x 15cm x 2.6mm - Ακρυλικό Φύλλο 15x15 (Μαύρο)
1215.069
Χρώμα : Μαύρο Διαστάσεις : 15x15cm Πάχος : 2.6mm
€3.47
χωρίς ΦΠΑ €2.80
Μη Διαθέσιμο
Plexiglass 15cm x 15cm x 2.6mm - Ακρυλικό Φύλλο 15x15 (Άσπρο)
1215.068
Χρώμα : Άσπρο Διαστάσεις : 15x15cm Πάχος : 2.6mm 
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Plastic Dual V-Wheel with Bearings
1215.659
They can be used with V-Slot Extrusion or OpenRail V-Wheel with bearings included Outer diameter: 24.4mm Inner diameter: Ideal for M5 screw
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
PC4-M10 Male Straight Pneumatic PTFE Tube Push Fit
1215.371
PTFE Tubing Outer Diameter: 4 mm. Thread: 10mm The upper part(black) can be inserted 4mm PTFE tube and self-locking Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life
€1.23
χωρίς ΦΠΑ €0.99
Μη Διαθέσιμο
Original Trinamic StepStick Protector
1201.002
Product description The SilentStepStick Protector is an addon module for StepStick and Pololu A4988 compatible stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the...
€9.70
χωρίς ΦΠΑ €7.82
Σε Απόθεμα
+ −
Original E3D Water Cooling Kit for Titan Aqua
1134.025
ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do....
€120.28
χωρίς ΦΠΑ €97.00
Σε Απόθεμα
+ −
Original E3D Volcano Silicone Sock
1134.011
Silicone Socks for E3D Volcano Heater Block and Nozzles These socks will keep your heater block clean and free from burnt and blackened plastic. They don’t just keep the block clean, but also keep heat inside the HotEnd and off your print. Made of a heat-resistant, non-stick silicone...
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Original E3D Volcano 1.75mm Starter Pack 24V
1134.010
Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D Volcano 1.75mm Starter Pack 12V
1134.009
// <!--[CDATA[ var require = { "baseUrl": "https://e3d-online.com/static/version1507640287/frontend/E3donline/default/en_US" }; // ]]-->// <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D V6 Silicone Sock
1134.014
Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.50mm
1134.122
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.40mm
1134.034
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.35mm
1134.033
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.24
χωρίς ΦΠΑ €13.90
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.30mm
1134.032
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.25mm
1134.031
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.004
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€74.40
χωρίς ΦΠΑ €60.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.001
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€86.80
χωρίς ΦΠΑ €70.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.003
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.002
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
Original E3D v6 Heat Break 3.00mm (Throat)
1134.121
This is a replacement HeatBreak for E3D-v6 3.00mm HotEnds.
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Original E3D v6 Heat Break 1.75mm (Throat)
1134.027
This is a replacement HeatBreak for E3D-v6 1.75mm HotEnds. Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve...
€21.70
χωρίς ΦΠΑ €17.50
Σε Απόθεμα
+ −
Original E3D Thermistor Cartridge
1134.019
3D Printer Thermistor Cartridge | E3D Online | E3D Online A custom made thermistor encapsulated into an easy to use cartridge package. Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs...
€9.99
χωρίς ΦΠΑ €8.06
Μη Διαθέσιμο
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.008
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.005
Not everybody needs the all-metal high-temperature performance of an E3D-v6. We’ve come to realise that there exists a need for a hotend that is reliable, and puts out great prints, but meets the budget of those who are just getting started in 3D printing. Lite6 is our answer to that need. By...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.007
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.006
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original E3D Hobb-Goblin - 5mm ID Drive Gear
1134.013
Hobb-Goblin - 5mm ID Drive Gear for 3d Printers | E3D Online A wicked little filament drive gear made from stainless steel with really sharp little teeth cut into it. These are carefully manufactured on a synchronised CNC processs which gives a sharp, consistent, and clean cut tooth profile...
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 24V 30W
1134.018
3D Printer Ceramic Heater Cartridge - 24v - 30w | E3D Online | E3D Online 24v 30w Ceramic Heater Cartridge Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. These 30w heaters provide a fantastic balance of being...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original E3D Heater Cartridge 12V 30W
1134.017
3D Printer Ceramic Heater Cartridge - 12v - 30w | E3D Online | E3D Online 12v 30w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original E3D Cyclops+ Water-Cooled 12v 1.75mm
1134.038
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€120.28
χωρίς ΦΠΑ €97.00
Σε Απόθεμα
+ −
Original E3D Cyclops+ Air-Cooled 12v 1.75mm
1134.037
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€111.60
χωρίς ΦΠΑ €90.00
Σε Απόθεμα
+ −
Original E3D Chimera+ Water-Cooled 12v 1.75mm
1134.036
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
Original E3D Chimera+ Air-Cooled 12v 1.75mm
1134.035
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€111.60
χωρίς ΦΠΑ €90.00
Σε Απόθεμα
+ −
Original Bondtech Shaft 4mm, L=25 mm
1143.007
Hardened and precision ground shaft for the Bondtech gearkits. Diameter: 4.00 mm Length: 25.0 mm
€1.86
χωρίς ΦΠΑ €1.50
Σε Απόθεμα
+ −
Original Bondtech Shaft 4mm, L=22 mm
1143.006
Hardened and precision ground shaft for the Bondtech gearkits. Diameter: 4.00 mm Length: 25.0 mm
€1.61
χωρίς ΦΠΑ €1.30
Σε Απόθεμα
+ −
Original Bondtech Push-Fit connector 4 mm
1143.011
Push-fit connector for 4 mm PTFE tube. Assembles into a pocket with 8.0 mm diameter and a depth of 6 mm.
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
Επόμενα 128 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ