Build it yourself

StaticBoards Ramps 1.4 SB Premium Board

ΚΩΔΙΚΟΣ: 1200.002

RAMPS 1.4SB electronics for your 3D printer. It supports huge amount of electricity thanks to the Toshiba MOSFET transistors and the 15A Molex connectors. Compatible with RepRap Prusa and Mendel 3D printers. Description This is the more famous and supported PCB for 3D printing. The design...

BrandSTATICBOARDS

€18.60

χωρίς ΦΠΑ €15.00

Σε Απόθεμα

+ −

3D Printer A4988 Reprap Stepper Motor Driver Module

ΚΩΔΙΚΟΣ: 1116.078

A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...

BrandOEM

€3.92

χωρίς ΦΠΑ €3.16

Σε Απόθεμα

+ −

PC4-M10 Male Straight Pneumatic PTFE Tube Push Fit

ΚΩΔΙΚΟΣ: 1215.371

PTFE Tubing Outer Diameter: 4 mm. Thread: 10mm The upper part(black) can be inserted 4mm PTFE tube and self-locking Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life

BrandOEM

€1.23

χωρίς ΦΠΑ €0.99

Μη Διαθέσιμο

DRV8825 Stepper Driver Module with Heatsink for Arduino

ΚΩΔΙΚΟΣ: 1116.117

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...

BrandOEM

€6.20

χωρίς ΦΠΑ €5.00

Σε Απόθεμα

+ −

Arduino Nano CNC Shield V4 - Stepper Motor Driver for Arduino (GRBL Compatible)

ΚΩΔΙΚΟΣ: 1116.971

This 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each...

BrandOEM

€7.73

χωρίς ΦΠΑ €6.23

Σε Απόθεμα

+ −

TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller

ΚΩΔΙΚΟΣ: 1116.340

Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...

BrandOEM

€11.20

χωρίς ΦΠΑ €9.03

Σε Απόθεμα

+ −

LJ12A3-4-Z/BX 6V-36V Inductive Proximity Sensor Switch for 3D Printer/CNC

ΚΩΔΙΚΟΣ: 1116.454

Model: LJ12A3-4-Z/BX Wire Type Cylindrical DC 3 Wire Type Switch Appearance Type Cylinder Type Theory Inductive Sensor Output Type NPN NO(Normal Open) Specs : Diameter of Head : 12mm Detecting Distance : 4mm Supply Voltage : DC 6-36V Current Output : 300mA...

BrandOEM

€5.59

χωρίς ΦΠΑ €4.51

Σε Απόθεμα

+ −

Nema 17 Wantai Stepper Motor,42BYGHW811L20P1-X2, 4800g.cm,2.5A, Flat Shaft 3D Reprap Printer (CE,ROSH,ISO)

ΚΩΔΙΚΟΣ: 1140.001

Part No.: 42BYGHW811L20P1-X2 Frame Size: NEMA17 Step Angle: 1.8 degree Voltage: 3.1 V Current: 2.5 A/phase Resistance: 1.25 Ohm/phase Inductance: 1.8 mH/phase Holding torque: 4800g-cm Rotor inertia: 68 g-cm2 Number of wire leads: 4 Weight:...

BrandWANTAI

€13.64

χωρίς ΦΠΑ €11.00

Σε Απόθεμα

+ −

Flexible Coupling Coupler /Shaft 5x8x25 mm

ΚΩΔΙΚΟΣ: 1116.748

3D printer Stepper Motor Flexible Coupling Coupler Size: 5 mm*8mm**25 mm

BrandOEM

€2.68

χωρίς ΦΠΑ €2.16

Σε Απόθεμα

+ −

RAMPS 1.5 - 3D Printer Controller Shield Board for Arduino Mega

ΚΩΔΙΚΟΣ: 1140.835

Main Features: Optimized and upgraded based on RAMPS1.4 Patch-type MOS tube, solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation. Can be extended to LCD and other parts. Design of Pololu plate pin socket can be easily replaced or...

BrandOEM

€7.96

χωρίς ΦΠΑ €6.42

Σε Απόθεμα

+ −

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.40mm

ΚΩΔΙΚΟΣ: 1134.034

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€12.40

χωρίς ΦΠΑ €10.00

Σε Απόθεμα

+ −

100K ohm NTC 3950 Thermistors with cable for 3D Printer Reprap

ΚΩΔΙΚΟΣ: 1116.752

This is pre–wired thermistor for RepRap 3D Printer extruder or heated bed, for your convenience, it is also equipped with 2 pin connector to mate with RepRap electronics (RAMPS 1.4, Sangunolulu etc) NTC 3950 Thermistor features: Thermistor temperature value table for Marlin...

BrandOEM

€1.66

χωρίς ΦΠΑ €1.34

Μη Διαθέσιμο

Teflon PTFE Tube 2x4mm

ΚΩΔΙΚΟΣ: 1116.757

Inside Diameter: 2mm Outside Diameter: 4mm Length: 1m Material: Teflon PTFE

BrandOEM

€2.01

χωρίς ΦΠΑ €1.62

Μη Διαθέσιμο

1pcs 0.4mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament

ΚΩΔΙΚΟΣ: 1116.939

1pcs 0.4mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament

BrandOEM

€1.13

χωρίς ΦΠΑ €0.91

Μη Διαθέσιμο

12V Fan 40x40x10mm (OEM)

ΚΩΔΙΚΟΣ: 1140.190

Big air flow. Low noisy. Long life. Specifications : Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 12V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm...

BrandOEM

€2.23

χωρίς ΦΠΑ €1.80

Μη Διαθέσιμο

Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)

ΚΩΔΙΚΟΣ: 1134.002

The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...

BrandE3D

€68.89

χωρίς ΦΠΑ €55.56

Σε Απόθεμα

+ −

Original E3D v6 Heat Break 1.75mm (Throat)

ΚΩΔΙΚΟΣ: 1134.027

This is a replacement HeatBreak for E3D-v6 1.75mm HotEnds. Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve...

BrandE3D

€12.40

χωρίς ΦΠΑ €10.00

Σε Απόθεμα

+ −

3D Printer J-Head Nozzle 0.4mm

ΚΩΔΙΚΟΣ: 1116.786

3D Printer J-Head Nozzle 0.4mm

BrandOEM

€1.13

χωρίς ΦΠΑ €0.91

Μη Διαθέσιμο

TMC2208 Stepper Motor Driver

ΚΩΔΙΚΟΣ: 1215.411

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...

BrandOEM

€14.56

χωρίς ΦΠΑ €11.74

Σε Απόθεμα

+ −

L298N V3 x4 Stepper/DC Motor Driver

ΚΩΔΙΚΟΣ: 1215.418

This dual L298N driver module, using ST’s L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit work stably. It can directly drive two 3~30V DC motor. and it provides a 5V output interface (the min input is 6V) to power for 5V...

BrandOEM

€13.43

χωρίς ΦΠΑ €10.83

Σε Απόθεμα

+ −

Original E3D Water Cooling Kit for Titan Aqua

ΚΩΔΙΚΟΣ: 1134.025

ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing...

BrandE3D

€99.89

χωρίς ΦΠΑ €80.56

Σε Απόθεμα

+ −

Trapezoidal Lead Screw T8-300mm with Brass Nut, Lead 8mm - Pitch 2mm

ΚΩΔΙΚΟΣ: 1116.776

Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:2mm Lead of thread:8mm Length:300mm

BrandOEM

€6.39

χωρίς ΦΠΑ €5.15

Σε Απόθεμα

+ −

24V Fan 40x40x10mm (2pin)

ΚΩΔΙΚΟΣ: 1256.011

Big air flow. Low noisy. Specifications : Wire:2pin Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 24V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:15cm...

BrandOEM

€2.23

χωρίς ΦΠΑ €1.80

Μη Διαθέσιμο

Original Bondtech Drivegear kit 1.75mm / 5mm shaft

ΚΩΔΙΚΟΣ: 1143.001

Prusa i3 MK2/S Printable Extruder Parts for Bondtech Drivegear kit https://www.thingiverse.com/thing:2683976 You will need the following parts: 1 x Bondtech Direct Gearset 1 x M3 thread bushing 1 x Thumbscrew assembly (Screw, spring, washer) 1 x Pin 3×20 mm M3 screws Bondtech DualDrive...

BrandBONDTECH

€56.90

χωρίς ΦΠΑ €45.89

Σε Απόθεμα

+ −