ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Η εταιρεία θα παραμείνει κλειστή το διάστημα 03-07/05 (Μ.Παρασκευή εως και Τρίτη του Πάσχα). Επιστροφή Τετάρτη 08/05/2024

Extruders

Ταξινόμηση:
Αλφαβητικά - Ω ως Α
24
Upgraded Universal Extruder Kit for Makerbot MK8 Extruder
1140.228
Applies to 1.75MM filament Quick Coupler Fittings of PC4-M5, 4*2 Teflon feed tube The extruder supports both short and long distance feeding
€6.72
χωρίς ΦΠΑ €5.42
Σε Απόθεμα
+ −
Teflon PTFE Tube 2x4mm
1116.757
Inside Diameter: 2mm Outside Diameter: 4mm Length: 1m Material: Teflon PTFE
€2.01
χωρίς ΦΠΑ €1.62
Μη Διαθέσιμο
Right MK10/Makerbot Extruder Feed Device Part For 3D Printer - 1.75mm Filament
1140.010
Features: Used for 1.75mm filament, Reprap, Makerbot. Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be...
€5.82
χωρίς ΦΠΑ €4.69
Σε Απόθεμα
+ −
Prusa i3 MK8 aluminum extruder kit - Right Hand
1116.961
Feature: MK8 extruder aluminum block DIY kit 3 type for your choice, Type 1 (right hand), Type 2 (left hand) and Type 3 (normal), please select the one you need. Reduce the wiredrawing problem when working for remote feeding Specifications: Model: MK8 Material: Aluminum-alloy 3 type to...
€6.39
χωρίς ΦΠΑ €5.15
Σε Απόθεμα
+ −
Prusa i3 MK8 aluminum extruder kit - Left Hand
1116.960
Feature: MK8 extruder aluminum block DIY kit 3 type for your choice, Type 1 (right hand), Type 2 (left hand) and Type 3 (normal), please select the one you need. Reduce the wiredrawing problem when working for remote feeding Specifications: Model: MK8 Material: Aluminum-alloy...
€5.16
χωρίς ΦΠΑ €4.16
Σε Απόθεμα
+ −
PC4-M10 Male Straight Pneumatic PTFE Tube Push Fit
1215.371
PTFE Tubing Outer Diameter: 4 mm. Thread: 10mm The upper part(black) can be inserted 4mm PTFE tube and self-locking Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life
€1.23
χωρίς ΦΠΑ €0.99
Μη Διαθέσιμο
Original E3D Water Cooling Kit for Titan Aqua
1134.025
ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do....
€120.28
χωρίς ΦΠΑ €97.00
Σε Απόθεμα
+ −
Original E3D Volcano Silicone Sock
1134.011
Silicone Socks for E3D Volcano Heater Block and Nozzles These socks will keep your heater block clean and free from burnt and blackened plastic. They don’t just keep the block clean, but also keep heat inside the HotEnd and off your print. Made of a heat-resistant, non-stick silicone...
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Original E3D Volcano 1.75mm Starter Pack 24V
1134.010
Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D Volcano 1.75mm Starter Pack 12V
1134.009
// <!--[CDATA[ var require = { "baseUrl": "https://e3d-online.com/static/version1507640287/frontend/E3donline/default/en_US" }; // ]]-->// <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D V6 Silicone Sock
1134.014
Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.004
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€74.40
χωρίς ΦΠΑ €60.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.001
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€86.80
χωρίς ΦΠΑ €70.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.003
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.002
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.008
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.005
Not everybody needs the all-metal high-temperature performance of an E3D-v6. We’ve come to realise that there exists a need for a hotend that is reliable, and puts out great prints, but meets the budget of those who are just getting started in 3D printing. Lite6 is our answer to that need. By...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.007
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.006
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original E3D Cyclops+ Water-Cooled 12v 1.75mm
1134.038
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€120.28
χωρίς ΦΠΑ €97.00
Σε Απόθεμα
+ −
Original E3D Cyclops+ Air-Cooled 12v 1.75mm
1134.037
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€111.60
χωρίς ΦΠΑ €90.00
Σε Απόθεμα
+ −
Original E3D Chimera+ Water-Cooled 12v 1.75mm
1134.036
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
Original E3D Chimera+ Air-Cooled 12v 1.75mm
1134.035
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€111.60
χωρίς ΦΠΑ €90.00
Σε Απόθεμα
+ −
Επόμενα 21 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ