ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Build it yourself

Ταξινόμηση:
Δημοφιλέστερα
48
0.5mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament
1116.940
1pcs 0.5mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
SK12 Shaft Support Linear Rail Vertical Bearings Shaft Guide Support Bracket
1116.911
Description: SK12 Shaft Support Linear Rail Vertical Bearings Shaft Guide Support Bracket Specification: Model: SK12 Shaft ID: 12mm Size: Approx. 42x14x37.5mm Hole Diameter: Approx. 5.5mm Holes Centre Distance: Approx. 32mm Material: Steel Net Weight: 28g
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
1pcs 0.3mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament
1116.938
1pcs 0.3mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
MKS-GEN L V1.0 Controller Mainboard Compatible Ramps1.4/Mega2560 R3 For 3D Printers
1215.538
1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors. 2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like. 3. Reserve external driver signal, available to...
€23.56
χωρίς ΦΠΑ €19.00
Σε Απόθεμα
+ −
Original E3D Hobb-Goblin - 5mm ID Drive Gear
1134.013
Hobb-Goblin - 5mm ID Drive Gear for 3d Printers | E3D Online A wicked little filament drive gear made from stainless steel with really sharp little teeth cut into it. These are carefully manufactured on a synchronised CNC processs which gives a sharp, consistent, and clean cut tooth profile...
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
Inductive proximity sensor switch work voltage 5V M8 2mm sensing (NPN NC LJ8A3-2-Z/AX-5V)
1116.749
Inductive proximity sensor switch work voltage 5V M8 2mm sensing (NPN NC LJ8A3-2-Z/AX-5V)
€4.96
χωρίς ΦΠΑ €4.00
Σε Απόθεμα
+ −
Original Bondtech Shaft 4mm, L=25 mm
1143.007
Hardened and precision ground shaft for the Bondtech gearkits. Diameter: 4.00 mm Length: 25.0 mm
€1.86
χωρίς ΦΠΑ €1.50
Σε Απόθεμα
+ −
5V 4010 Fan 40x40x10mm
1256.249
Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 5V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
Antivibration Dampener For Stepper Nema17 - Shock Absorber
1140.601
Specification: Material: Alloy Size: 3.7cm x 3.7cm/1.5'' x 1.5'' Color: Bronze Features : Effective to reduce shock. Suitable for 3D printer. Antivibration dampers for mostly applied stepper motors are available. These energy- absorbing rubber mounts with a...
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
MK3 Aluminum Heatbed 300x300x3mm
1116.986
MK2a Aluminum Heatbed Real Dimensions 330x330x3
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.007
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
3D Printer J-Head Nozzle 0.2mm
1116.941
3D Printer J-Head Nozzle 0.2mm
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
AT2100 Stepstick Stepper Motor Driver With Heat Sink
1215.685
Supply Voltage: 3.3V-5V Dissipation Power: 2.5A Operating Temperature: -40°-+85°  
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
0.2mm Makerbot Mk8 3D Printer Extruder Thread Nozzle For 1.75mm Filament
1140.176
Specification: Material: copper (brass) Filament:1.75MM Nozzle: 0.2 Size:13 x 6mm(L x Dia) Screw thread: M6 Application: makerbot 3D printer extruder.
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
SCS8LUU Metal 8mm Linear Ball Bearing - Motion Bearing For CNC
1116.980
8mm Linear Motion Bearing Long – SC8LUU Specifications For 8mm linear railings Dynamic Load rating: 410 N Static Load rating: 800 N Four ball races
€3.58
χωρίς ΦΠΑ €2.89
Σε Απόθεμα
+ −
12v DC Cooling Blower Fan 4010
1215.661
Type: 4010 Size: 40*40*10mm Voltage: DC12V 0.1A Application: Suitable for 3d printer
€4.25
χωρίς ΦΠΑ €3.43
Σε Απόθεμα
+ −
24V Fan 40x40x10mm (3pin)
1256.010
Wire:3pin Dimensions: 40X40X10mm Rated Voltage: DC 24V Rated Current: 0.12±0.03 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Cable Length:15cm
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
Stainless Steel Throat with Teflon Tube for 1.75mm Filament
1116.947
Stainless Steel V6 Throat with Teflon Tube for 1.75mm Filament Length: 22mm
€1.79
χωρίς ΦΠΑ €1.44
Σε Απόθεμα
+ −
Original E3D Volcano 1.75mm Starter Pack 12V
1134.009
// <!--[CDATA[ var require = { "baseUrl": "https://e3d-online.com/static/version1507640287/frontend/E3donline/default/en_US" }; // ]]-->// <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original Bondtech Shaft 4mm, L=22 mm
1143.006
Hardened and precision ground shaft for the Bondtech gearkits. Diameter: 4.00 mm Length: 25.0 mm
€1.61
χωρίς ΦΠΑ €1.30
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.008
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Βίδα DIN912 Αλλεν Μ3 35mm (20 τμχ)
1021.167
Βίδα DIN912 Αλλεν Μ3 35mm (20 τμχ)
€2.98
χωρίς ΦΠΑ €2.40
Μη Διαθέσιμο
Βίδα M3 40mm - Σταυρός (Stainless Steel Screw M3x40 Round head)
1140.966
Drive Style: Phillips Head Style: Round Stainless Steel
€0.11
χωρίς ΦΠΑ €0.09
Σε Απόθεμα
+ −
Original E3D Chimera+ Air-Cooled 12v 1.75mm
1134.035
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€111.60
χωρίς ΦΠΑ €90.00
Σε Απόθεμα
+ −
1.75mm Filament Detector (Run Out Monitor)
1140.004
Generally, the 3D printer DIY kit is not able to detect running out of filament, it will continue to print until file is completed even if the filament runs out. This always leads to incomplete printing which will be wasting your time and filament, this detection module will complete fixed...
€7.28
χωρίς ΦΠΑ €5.87
Σε Απόθεμα
+ −
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
1147.016
2pcs Misumi PSFG8-422 Smooth Rods 422mm For Prusa MK2/MK2s Zaribo Z-AXIS 320
€13.64
χωρίς ΦΠΑ €11.00
Σε Απόθεμα
+ −
TL-Smoother Filter Module For 3D Printer Stepper Motor
1215.731
Lower vibration lower noise smoother result TheTL-Smoother is an addon module for 3D printer stepper motor drivers. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers. The board provides flyback diodes...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-350mm with Brass Nut, Lead 8mm - Pitch 2mm
1116.775
Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:8mm Lead of thread:8mm Length:350mm
€8.33
χωρίς ΦΠΑ €6.72
Σε Απόθεμα
+ −
MGN12 Linear Guide 500mm with MGN12H
1140.942
Rail Guide Length: 500mm Block: MGN12H carriage
€42.00
χωρίς ΦΠΑ €33.87
Σε Απόθεμα
+ −
Inductive Proximity Sensor Switch - NPN NC DC6-36V M8 (LJ8A3-2-Z/AX)
1215.978
Product Name: Inductive Proximity Switch Model: LJ8A3-2-Z/AX Wire Type : DC 3 Wire (Brown ,Black, Blue) NPN; Switch Appearance Type : Cylinder Theory : Inductive Sensor; Output Type : NC(Normal Closed) Diameter of Head : 8mm; Detecting Distance : 2±10%mm Detecting...
€4.36
χωρίς ΦΠΑ €3.52
Σε Απόθεμα
+ −
T sliding Fastener Bracket for 2020 Aluminum Profile
1140.897
Material: Carbon steel (galvanized) Screw hole: M5
€1.69
χωρίς ΦΠΑ €1.36
Σε Απόθεμα
+ −
MK10 Aluminum Heat Sink for Creality Ender-3/CR10
1215.665
Features: This heat sink radiator is compatible for 3D printer CR-10 Series and Ender-3. CR-10 Series include CR-10, CR-10mini, CR-10S, CR-10S4 and CR-10S5. Solid aluminum material for durable use. Light weight with high heat dissipation performance. Side lock screw hole, small...
€4.25
χωρίς ΦΠΑ €3.43
Σε Απόθεμα
+ −
GT2 20T W6 B5 With Tooth Aluminum Timing Drive Pulley
1116.935
GT2 20T W6 B5 With Tooth Aluminum Timing Drive Pulley
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Heat Sink 40x40x11 for MK7 / MK8 Extruder (Nema17)
1140.034
DESCRIPTION MK7/MK8 Heat Sink for 3D Printer Specifications : Center hole: 12 mm  Screw mounting holes: 3 mm Dimensions: 40x40x11mm
€2.01
χωρίς ΦΠΑ €1.62
Σε Απόθεμα
+ −
ESP-12S Wireless Controller WIFI Module for MKS TFT32 v4.0 touch screen
1215.012
Size: 32*24mm Configuration: Cloud servers, Android/IOS APP Firmware Upgrade: Via SD or WEB Transfer Rate: 80~100Kbytes Operating Voltage: DC 3.3V Document Type: Gcode Protocol：TCP/IP Operating Temperature Range: -30~80 degree Language:CN/EN(Auto-ID)
€17.36
χωρίς ΦΠΑ €14.00
Σε Απόθεμα
+ −
3D Printer MK3 Aluminum 3mm Heatbed RepRap (214mm x 214mm 12/24V)
1116.785
- Heatbed with 3.2mm Aluminum Core. Print directly on the heatbed, no need for glass plate. It's a much lighter solution than PCB heatbed + glass, which makes it better for faster prints. - Dual power supply. Operate at 12V or 24V. You can use thinner wires when operating at 24V. - A central...
€12.40
χωρίς ΦΠΑ €10.00
Σε Απόθεμα
+ −
M3 T Sliding Square Nut Block for 2020 Aluminum Profile
1215.330
Type: T sliding nut Material: Carbon steel nickel plated
€0.27
χωρίς ΦΠΑ €0.22
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.35mm
1134.033
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.24
χωρίς ΦΠΑ €13.90
Σε Απόθεμα
+ −
V-Slot Plate with V-Rail Wheel for 2020 extrusion profile
1215.730
Material : Aluminum alloy Plate size : T6mmx50mmx50mm Apply to : 2020 v-slot aluminum profile
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
3D Printer Linear Smooth Rod M10 40cm
1140.084
3D Printer Linear Smooth Rod M10 40cm
€5.48
χωρίς ΦΠΑ €4.42
Σε Απόθεμα
+ −
0.5mm Makerbot Mk8 3D Printer Extruder Thread Nozzle For 1.75mm Filament
1140.178
Specification: Material: copper (brass) Filament:1.75mm Nozzle: 0.5mm Size:13 x 6mm(L x Dia) Screw thread: M6 Application: makerbot 3D printer extruder.
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
T8 Brass nut
1116.779
This T8 Brass nut is machined to fit T8 lead screws. It features an 8mm diameter x 2mm pitch threading and has 4 external mounting points for attaching the screw to the moveable portion of your project. The nut measures 22.25mm in diameter x 15.75mm in length.  
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
GT2 20T W6 B5 Without Tooth Aluminum Timing Drive Pulley
1116.934
GT2 20T W6 B5 Without Tooth Aluminum Timing Drive Pulley
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.005
Not everybody needs the all-metal high-temperature performance of an E3D-v6. We’ve come to realise that there exists a need for a hotend that is reliable, and puts out great prints, but meets the budget of those who are just getting started in 3D printing. Lite6 is our answer to that need. By...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
0.6mm E3D-V6 Stainless Steel Nozzle for 1.75mm Filament
1140.491
Specification: Material: Stainless Steel Nozzle: 0.6 mm Filament: 1.75 mm Screw thread: M6
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
2040 Aluminum Profile Extrusion 600mm Length - T-Slot Frame For CNC
1140.953
20 Series Compatible with all 20 Series Fasteners and Accessories Six available T-slots for mounting Ideal for machine guards, enclosures, work benches, displays, and panel mount racks 6105-T5, Clear Anodized Aluminum Length : 600mm
€8.68
χωρίς ΦΠΑ €7.00
Σε Απόθεμα
+ −
Aluminum Heater Block Makerbot MK7 MK8 Print Head Hot End Heating Block 16×16×12mm
1140.041
Aluminum Heater Block Makerbot MK7 MK8 Print Head Hot End Heating Block 16×16×12mm
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
Βίδα DIN912 Αλλεν Μ3 40mm (20 τμχ)
1021.166
Βίδα DIN912 Αλλεν Μ3 40mm (20 τμχ)
€4.17
χωρίς ΦΠΑ €3.36
Μη Διαθέσιμο
Επόμενα 48 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ