Build it yourself

VNH2SP30 30A Stepper Motor Driver module for Arduino

ΚΩΔΙΚΟΣ: 1215.784

Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown

BrandOEM

€11.76

χωρίς ΦΠΑ €9.48

Σε Απόθεμα

+ −

Makerbot MK7 / MK8 Heat Sink 40x40x11

ΚΩΔΙΚΟΣ: 1140.040

HR0739 Makerbot accessories MK7 / MK8 heat sink 40 * 40 * 11 Center hole goods size : 12 mm Screw mounting holes 3 mm Mounting holes from 31 mm Fin length 40 mm width 40 mm 11 mm thick

BrandOEM

€2.23

χωρίς ΦΠΑ €1.80

Σε Απόθεμα

+ −

3D Printer J-Head Nozzle 0.6mm

ΚΩΔΙΚΟΣ: 1116.944

3D Printer J-Head Nozzle 0.6mm

BrandOEM

€1.13

χωρίς ΦΠΑ €0.91

Σε Απόθεμα

+ −

KP08 Vertical Trapezoidal Bracket for T8 Lead Screws

ΚΩΔΙΚΟΣ: 1116.981

This part can be used for building CNC machines,3D Printers, robotics and linear motion systems. Pillow block can hold 8mm diameter lead screw on the opposite side from driving motor. Ball bearing is self-aligning, means you don't need to adjust centers perfectly. Bearing has par of set screws.

BrandOEM

€2.79

χωρίς ΦΠΑ €2.25

Σε Απόθεμα

+ −

Limit Switch SS-5GL - Lever Arm Normally Open/Close

ΚΩΔΙΚΟΣ: 1140.693

Type: Standard Contact Form: SPDT Switch Function: ON - (OFF), OFF - (ON) Actuator: Lever Current Rating: 5A Voltage Rating AC: 125 VAC Operating Force: 0.5 N

BrandOEM

€1.61

χωρίς ΦΠΑ €1.30

Σε Απόθεμα

+ −

Βίδα M3 30mm - Σταυρός (Stainless Steel Screw M3x30 Round head)

ΚΩΔΙΚΟΣ: 1140.964

Drive Style: Phillips Head Style: Round Stainless Steel

BrandOEM

€0.10

χωρίς ΦΠΑ €0.08

Σε Απόθεμα

+ −

Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.30mm

ΚΩΔΙΚΟΣ: 1134.032

M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...

BrandE3D

€17.26

χωρίς ΦΠΑ €13.92

Σε Απόθεμα

+ −

M5 T NuT T1.5*10mm*15mm for Aluminum Profile

ΚΩΔΙΚΟΣ: 1140.833

T1.5*10*15mm Suitable for aluminum profile Carbon steel material Zn-plated finishing

BrandOEM

€0.22

χωρίς ΦΠΑ €0.18

Σε Απόθεμα

+ −

Plexiglass 20cm x 20cm x 2.6mm - Ακρυλικό Φύλλο 20x20 (Μαύρο)

ΚΩΔΙΚΟΣ: 1215.066

Χρώμα : Μαύρο Διαστάσεις : 20x20cm Πάχος : 2.6mm

BrandOEM

€4.75

χωρίς ΦΠΑ €3.83

Σε Απόθεμα

+ −

Original Bondtech Needlebearing for Extruder Mini

ΚΩΔΙΚΟΣ: 1143.004

High precision needle bearing that is used in our Bondtech Mini, for shaft diameter 5.0 mm, two pieces is used for one drivegear.

BrandBONDTECH

€3.35

χωρίς ΦΠΑ €2.70

Σε Απόθεμα

+ −

1Pcs 2GT-16 (16 teeth) wheel pulley bore 3mm

ΚΩΔΙΚΟΣ: 1116.745

3D printer accessories 2GT 16 tooth synchronous wheel pulley wheel Perlin passive idler pulley wheel bore 3mm

BrandOEM

€3.47

χωρίς ΦΠΑ €2.80

Σε Απόθεμα

+ −

Μ4 DIN912 Headless Hex screw for 2020 Corners

ΚΩΔΙΚΟΣ: 1140.895

d:4mm L:6mm dz:2.5mm s:2mm t:1.5mm Thread Pitch:0.7mm

BrandOEM

€0.07

χωρίς ΦΠΑ €0.06

Σε Απόθεμα

+ −

Original Trinamic StepStick Protector

ΚΩΔΙΚΟΣ: 1201.002

Product description The SilentStepStick Protector is an addon module for StepStick and Pololu A4988 compatible stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the...

BrandTRINAMIC

€9.70

χωρίς ΦΠΑ €7.82

Σε Απόθεμα

+ −

5V 4010 Fan 40x40x10mm

ΚΩΔΙΚΟΣ: 1256.249

Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 5V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm

BrandOEM

€2.23

χωρίς ΦΠΑ €1.80

Μη Διαθέσιμο

Original E3D Hobb-Goblin - 5mm ID Drive Gear

ΚΩΔΙΚΟΣ: 1134.013

Hobb-Goblin - 5mm ID Drive Gear for 3d Printers | E3D Online A wicked little filament drive gear made from stainless steel with really sharp little teeth cut into it. These are carefully manufactured on a synchronised CNC processs which gives a sharp, consistent, and clean cut tooth profile...

BrandE3D

€15.50

χωρίς ΦΠΑ €12.50

Σε Απόθεμα

+ −

MKS-GEN L V1.0 Controller Mainboard Compatible Ramps1.4/Mega2560 R3 For 3D Printers

ΚΩΔΙΚΟΣ: 1215.538

1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors. 2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like. 3. Reserve external driver signal, available to...

BrandOEM

€23.56

χωρίς ΦΠΑ €19.00

Σε Απόθεμα

+ −