Build it yourself

Original E3D Chimera+ Air-Cooled 12v 1.75mm

ΚΩΔΙΚΟΣ: 1134.035

Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...

BrandE3D

€99.89

χωρίς ΦΠΑ €80.56

Σε Απόθεμα

+ −

M5 T sliding Nut (Block Square) for 2020 Aluminum Profile

ΚΩΔΙΚΟΣ: 1140.493

Screw size: M5 Dimensions:10x10x4.5 mm

BrandOEM

€0.27

χωρίς ΦΠΑ €0.22

Σε Απόθεμα

+ −

TMC2209 Stepper Motor Driver v2.0

ΚΩΔΙΚΟΣ: 1256.230

Features: Ultra quiet Large heat sink,good heat dissipation Support sensorless-homing function. Support uart mode by set jumper caps instead of welding on mks gen L V2.0,skr1.3/1.4,mks sgen L. Parameter: Default current:0.88a Recommend current:1.72a(at most)...

BrandOEM

€8.41

χωρίς ΦΠΑ €6.78

Σε Απόθεμα

+ −

Μ4 DIN912 Headless Hex screw for 2020 Corners

ΚΩΔΙΚΟΣ: 1140.895

d:4mm L:6mm dz:2.5mm s:2mm t:1.5mm Thread Pitch:0.7mm

BrandOEM

€0.07

χωρίς ΦΠΑ €0.06

Σε Απόθεμα

+ −

MK3 Aluminum Heatbed 300x300x3mm

ΚΩΔΙΚΟΣ: 1116.986

MK2a Aluminum Heatbed Real Dimensions 330x330x3

BrandOEM

€12.40

χωρίς ΦΠΑ €10.00

Σε Απόθεμα

+ −

Plexiglass 20cm x 20cm x 2.6mm - Ακρυλικό Φύλλο 20x20 (Μαύρο)

ΚΩΔΙΚΟΣ: 1215.066

Χρώμα : Μαύρο Διαστάσεις : 20x20cm Πάχος : 2.6mm

BrandOEM

€4.75

χωρίς ΦΠΑ €3.83

Μη Διαθέσιμο

1pcs SK8 Shaft Support Linear Rail Vertical Bearings Shaft Guide Support Bracket

ΚΩΔΙΚΟΣ: 1116.936

1pcs SK8 Shaft Support Linear Rail Vertical Bearings Shaft Guide Support Bracket

BrandOEM

€2.23

χωρίς ΦΠΑ €1.80

Σε Απόθεμα

+ −

1m HT-NTC100K Thermistor / Temperature Sensor with Connector

ΚΩΔΙΚΟΣ: 1256.213

Features Temperature range:-50 ℃~350 ℃ Temperature head length: 15 mm Temperature head cylinder diameter: 3 mm Wiring length: 1 m

BrandOEM

€1.46

χωρίς ΦΠΑ €1.18

Μη Διαθέσιμο

M3 T Sliding Nut for 2020 Aluminum Profile - Plated Carbon Steel

ΚΩΔΙΚΟΣ: 1140.280

Material: Carbon steel Surface Treated: Zin plated Type: T Sliding nut Series: 20 Series

BrandOEM

€0.11

χωρίς ΦΠΑ €0.09

Σε Απόθεμα

+ −

2m HT-NTC100K Thermistor / Temperature Sensor with Connector

ΚΩΔΙΚΟΣ: 1256.214

Features Temperature range:-50 ℃~350 ℃ Temperature head length: 15 mm Temperature head cylinder diameter: 3 mm Wiring length: 2 m

BrandOEM

€1.79

χωρίς ΦΠΑ €1.44

Μη Διαθέσιμο

Nema 17 Short Stepper - 0.09Nm 1.8 degree OK42STH22-0804AC

ΚΩΔΙΚΟΣ: 1256.127

Step Angle(degrees):1.8 Holding Torque:9mn.m Current / Phase:0.8amp Power: 2.64 VDC

BrandOEM

€12.31

χωρίς ΦΠΑ €9.93

Σε Απόθεμα

+ −

1pcs 0.2mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament

ΚΩΔΙΚΟΣ: 1116.937

1pcs 0.2mm Makerbot Mk8 3D Printer Extruder Nozzle For 1.75mm Filament

BrandOEM

€1.13

χωρίς ΦΠΑ €0.91

Σε Απόθεμα

+ −

Βίδα M3 20mm - Σταυρός (Stainless Steel Screw M3x20 Round head)

ΚΩΔΙΚΟΣ: 1140.962

Drive Style: Phillips Head Style: Round Stainless Steel

BrandOEM

€0.09

χωρίς ΦΠΑ €0.07

Σε Απόθεμα

+ −

1.75mm Filament Detector (Run Out Monitor)

ΚΩΔΙΚΟΣ: 1140.004

Generally, the 3D printer DIY kit is not able to detect running out of filament, it will continue to print until file is completed even if the filament runs out. This always leads to incomplete printing which will be wasting your time and filament, this detection module will complete fixed...

BrandOEM

€7.28

χωρίς ΦΠΑ €5.87

Σε Απόθεμα

+ −

Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)

ΚΩΔΙΚΟΣ: 1134.005

Not everybody needs the all-metal high-temperature performance of an E3D-v6. We’ve come to realise that there exists a need for a hotend that is reliable, and puts out great prints, but meets the budget of those who are just getting started in 3D printing. Lite6 is our answer to that need....

BrandE3D

€49.60

χωρίς ΦΠΑ €40.00

Σε Απόθεμα

+ −

Black 3030 Aluminum Profile Extrusion 400mm Length - T-Slot Frame For CNC

ΚΩΔΙΚΟΣ: 1140.956

Applications: Professional 3D Printers, Plasma, Lasers, Stands, Furniture, etc. Model: 3030 Material: Aluminium Alloy - 6063 T5 Color: Black Tolerances: Length(+/- 3mm) Dimension: 30mm x 30mm Length: 400mm Features: 1. The 3030 T-Slotted Extrusions are perfect for DIY, such as...

BrandOEM

€5.21

χωρίς ΦΠΑ €4.20

Σε Απόθεμα

+ −