ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

E3D-Online

Ταξινόμηση:
Αλφαβητικά - Α ως Ω
128
Original E3D Brass Volcano Nozzle - 1.75mm x 0.40mm
1134.085
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 0.60mm
1134.086
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 0.80mm
1134.087
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 1.00mm
1134.088
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 1.20mm
1134.089
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Chimera+ Air-Cooled 12v 1.75mm
1134.035
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€111.60
χωρίς ΦΠΑ €90.00
Σε Απόθεμα
+ −
Original E3D Chimera+ Water-Cooled 12v 1.75mm
1134.036
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.25mm
1134.039
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.30mm
1134.040
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.35mm
1134.041
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.40mm
1134.042
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.50mm
1134.043
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Cyclops+ Air-Cooled 12v 1.75mm
1134.037
Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€111.60
χωρίς ΦΠΑ €90.00
Σε Απόθεμα
+ −
Original E3D Cyclops+ Water-Cooled 12v 1.75mm
1134.038
leeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V...
€120.28
χωρίς ΦΠΑ €97.00
Σε Απόθεμα
+ −
Original E3D Embedded Bowden Coupling for Metal
1134.078
These pneumatic fittings have a brass metal body which is designed to provide a simple and cost-effective way of inserting bowden tubing directly into your aluminium components. The couplings are designed to take PTFE tubing with an outer diameter of a 1/8" (3.18mm) for 1.75mm filament, and...
€3.43
χωρίς ΦΠΑ €2.77
Μη Διαθέσιμο
Original E3D Experimental High-Resolution v6 Nozzle - 1.75mm x 0.15mm
1134.081
0.15mm Experimental High-Resolution Nozzle This 0.15mm nozzle allows you to print some really, seriously, very, extremely tiny parts with with a level of fine detail that will blow you away. We wrote a whole blog post about it! For complete requirements and specifications check our blog and...
€22.88
χωρίς ΦΠΑ €18.45
Μη Διαθέσιμο
Original E3D Geared Stepper Motor - 5.18:1 Reduction / 196Ncm Torque / 1.8° / 1.2A
1134.103
This motor uses a planetary gearbox with a 5.18:1 reduction. This gives you up to 196Ncm of torque without the need for high current stepper drivers, however you will not be able to run this motor as fast as a non-geared one. The main application of this motor is in direct extruders. NEMA...
€51.65
χωρίς ΦΠΑ €41.65
Μη Διαθέσιμο
Original E3D Groove Mount Bowden Adaptor for 4mm PTFE - 1.75mm Filament
1134.045
This is a neat little solution for quickly and easily converting a direct extruder that would normally accept a groovemount hotend into a bowden extruder. Simply mounts in like a Hot End, but instead accepts our PTFE tubing securely in an embedded bowden coupler. This is a neat little solution...
€9.05
χωρίς ΦΠΑ €7.30
Σε Απόθεμα
+ −
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.40mm
1134.090
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.60mm
1134.091
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.80mm
1134.092
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 1.00mm
1134.093
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 1.20mm
1134.094
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 12V 30W
1134.017
3D Printer Ceramic Heater Cartridge - 12v - 30w | E3D Online | E3D Online 12v 30w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original E3D Heater Cartridge 12v 40w
1134.052
12v 40w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly-toleranced enamel resistors and switch to a purpose-made high-power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a meter of sillicone...
€9.18
χωρίς ΦΠΑ €7.40
Μη Διαθέσιμο
Original E3D Heater Cartridge 24V 30W
1134.018
3D Printer Ceramic Heater Cartridge - 24v - 30w | E3D Online | E3D Online 24v 30w Ceramic Heater Cartridge Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. These 30w heaters provide a fantastic balance of being...
€9.05
χωρίς ΦΠΑ €7.30
Μη Διαθέσιμο
Original E3D Heater Cartridge 24V 40W
1134.051
24v 40w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a metre of...
€9.18
χωρίς ΦΠΑ €7.40
Σε Απόθεμα
+ −
Original E3D Hemera Bowdapter
1134.120
This kit contains the following: 1 x Bowden Adapter 1 x Collet 1 x Collet clip
€10.23
χωρίς ΦΠΑ €8.25
Σε Απόθεμα
+ −
Original E3D Hemera Bowden Kit 1.75mm
1134.116
Dual drive Hemera features a dual-drive, hardened stainless steel drive train, providing a huge boost in grip compared to single drive systems. As standard, it is fully capable of printing abrasive filaments without risk of premature wear. Mounting made easy The custom motor, based on a...
€149.90
χωρίς ΦΠΑ €120.89
Μη Διαθέσιμο
Original E3D Hemera Heatbreak
1134.118
This product contains: 1 x 1.75mm E3D Hemera heatbreak.
€17.24
χωρίς ΦΠΑ €13.90
Μη Διαθέσιμο
Original E3D Hemera Hot Side
1134.119
This kit contains: 1 x E3D Hemera heatbreak 1 x Brass V6 Nozzle (1.75mm, 0.4mm) 1 x V6 heater block 1 x V6 silicone sock 1 x Thermal compound paste
€42.90
χωρίς ΦΠΑ €34.60
Σε Απόθεμα
+ −
Original E3D Hemera Idler Kit
1134.117
This kit contains: 1 x Idler 1 x Slide block 1 x Spring block 1 x Thumbwheel 1 x M3 square nut 1 x Idler shaft
€10.69
χωρίς ΦΠΑ €8.62
Σε Απόθεμα
+ −
Original E3D High Precision Heater Cartridge 12V 30W
1134.079
A powerful heater for your HotEnd, with improved reliability and highly precise temperature output. A high-tolerance canister boosts thermal efficiency, while a built-in Molex connector makes removing your HotEnd from your 3D printer easier than ever. Key Features Highly precise temperature...
€27.53
χωρίς ΦΠΑ €22.20
Σε Απόθεμα
+ −
Original E3D High Precision Heater Cartridge 24V 30W
1134.080
A powerful heater for your HotEnd, with improved reliability and highly precise temperature output. A high-tolerance canister boosts thermal efficiency, while a built-in Molex connector makes removing your HotEnd from your 3D printer easier than ever. Key Features Highly precise...
€26.35
χωρίς ΦΠΑ €21.25
Μη Διαθέσιμο
Original E3D Hobb-Goblin - 5mm ID Drive Gear
1134.013
Hobb-Goblin - 5mm ID Drive Gear for 3d Printers | E3D Online A wicked little filament drive gear made from stainless steel with really sharp little teeth cut into it. These are carefully manufactured on a synchronised CNC processs which gives a sharp, consistent, and clean cut tooth profile...
€15.50
χωρίς ΦΠΑ €12.50
Σε Απόθεμα
+ −
Original E3D Hobb-Goblin - 8mm Hobbed Shaft Kit
1134.066
A wicked little filament drive hobbed shaft made from stainless steel with really sharp little teeth cut into it. They're carefully manufactured on a synchronised CNC process which gives a sharp, consistent, and clean cut tooth profile that has incredibly good grip. We've tested these with...
€16.68
χωρίς ΦΠΑ €13.45
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.006
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.007
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€65.89
χωρίς ΦΠΑ €53.14
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.005
Not everybody needs the all-metal high-temperature performance of an E3D-v6. We’ve come to realise that there exists a need for a hotend that is reliable, and puts out great prints, but meets the budget of those who are just getting started in 3D printing. Lite6 is our answer to that need. By...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.008
E3D V6 E3D Lite6 Print Performance Max Temperature 400°C+ 245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm Compatibility Bowden...
€60.76
χωρίς ΦΠΑ €49.00
Σε Απόθεμα
+ −
Original E3D Nozzle Fun Pack - 1.75mm
1134.064
A full collection of E3D V6 Ecosystem nozzles, set into soft foam for protection. Print all the things in all the resolutions! Suitable for all 1.75mm E3D Hotends except for Cyclops and Volcano. We've included the full range of nozzles for those who want to explore the limits of high resolution...
€50.48
χωρίς ΦΠΑ €40.71
Μη Διαθέσιμο
Original E3D Nozzle Pro Pack - 1.75mm
1134.065
This pack is the pinnacle of nozzle prowess, featuring six of our most exciting, useful and experimental nozzles. Brass, Copper Alloy, and Hardened Steel all feature in this kit, matched with the sizes we recommend for the most interesting use cases. Not to mention, this pack means you get more...
€114.89
χωρίς ΦΠΑ €92.65
Μη Διαθέσιμο
Original E3D Nozzle X V6-1.75mm-0.40mm
1134.102
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which...
€47.90
χωρίς ΦΠΑ €38.63
Μη Διαθέσιμο
Original E3D Nozzle X V6-1.75mm-0.60mm
1134.113
The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which...
€47.90
χωρίς ΦΠΑ €38.63
Σε Απόθεμα
+ −
Original E3D Plated Copper Volcano Block
1134.101
Print big and fast! The plated copper Volcano upgrades your V6 or Aero HotEnd to print bigger, faster, and stronger parts. Easily swap your heater block out for this block This listing is for the Plated Copper block only. The Plated Copper-Alloy Volcano Heater Block: These blocks are...
€43.59
χωρίς ΦΠΑ €35.15
Μη Διαθέσιμο
Original E3D Slimline Stepper Motor 1.4A / 0.9°
1134.047
A Nema17 12.7N-cm stepper motor with D-shaft and 1.0m wiring. Ultra-Slim NEMA17 Stepper Motors for use with your Titan extruder. Only 25mm body length, producing 12.7N-cm of torque these motors make an excellent choice for use on your extruder. These motors have been custom made for use with...
€20.71
χωρίς ΦΠΑ €16.70
Μη Διαθέσιμο
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.25mm
1134.082
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.47
χωρίς ΦΠΑ €21.35
Μη Διαθέσιμο
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.40mm
1134.083
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.45
χωρίς ΦΠΑ €21.33
Μη Διαθέσιμο
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.80mm
1134.084
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.47
χωρίς ΦΠΑ €21.35
Μη Διαθέσιμο
Original E3D Super Whopper Stepper Motor - 1.8° / 2A / 8kg/cm Holding Torque
1134.077
If planning on using this motor, we suggest using a high current stepper driver such as the DRV 8825 . Whilst standard drivers such as the A4988 can produce the 2.0A rated current of this motor, this is at the limit of their specification so they may be prone to overheating, triggering their...
€37.20
χωρίς ΦΠΑ €30.00
Μη Διαθέσιμο
Original E3D SuperVolcano Heater Cartridge 24V 80W
1134.106
These 24V-80W heaters have been designed specifically for the needs of the SuperVolcano HotEnd and provide the much needed power in order to achieve the highest flow rate possible. These have an extra long 47.50mm heater cartridge to fit the fit the geometry of the SuperVolcano Block....
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D SuperVolcano Upgrade Kit (Eruption pack)
1134.108
Eruption Pack 1 x Plated Copper SuperVolcano Heater Block 1 x Thermistor 1 x Thermistor Extension Cable 1 x Silicone Glass Fibre Sleeving 1 x 80W Heater Cartridge 1 x Brass 0.8mm, 1mm, 1.2mm and 1.4mm Nozzle 1 x Thermal Paste 4 x M3 Grub Screws 1 x Hex Key
€192.51
χωρίς ΦΠΑ €155.25
Μη Διαθέσιμο
Original E3D Thermal Compound Paste
1134.067
€1.90
χωρίς ΦΠΑ €1.53
Μη Διαθέσιμο
Original E3D Thermistor Cartridge
1134.019
3D Printer Thermistor Cartridge | E3D Online | E3D Online A custom made thermistor encapsulated into an easy to use cartridge package. Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs...
€9.99
χωρίς ΦΠΑ €8.06
Μη Διαθέσιμο
Original E3D Titan Extruder Hobb (Stainless Steel)
1134.111
A replacement stainless steel extruder hobb for the Titan and Titan Aero.
€38.19
χωρίς ΦΠΑ €30.80
Σε Απόθεμα
+ −
Original E3D Titan Replacement Kit - Bearings & Lid
1134.046
This kit contains the new Tritan Titan lid & two new bearings suitable for Titan and Titan Aero. Previous to February 2018, Titan lids were made of polycarbonate and occasional failure was occuring due to the the chemical composition of bearing lubricant. The solution to this is now...
€5.08
χωρίς ΦΠΑ €4.10
Μη Διαθέσιμο
Original E3D Titan Thumb Wheel
1134.112
€5.21
χωρίς ΦΠΑ €4.20
Σε Απόθεμα
+ −
Original E3D V6 Aluminum Heater Block
1134.107
This heater block works with our New Standard thermistor sensor for V6... Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your E3D-v6 HotEnd, or a Type-K Thermistor cartridge, instead of a...
€23.89
χωρίς ΦΠΑ €19.27
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.25mm
1134.053
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.30mm
1134.054
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.35mm
1134.055
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€11.41
χωρίς ΦΠΑ €9.20
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.40mm
1134.056
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.50mm
1134.057
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
Original E3D V6 Brass Nozzle - 1.75mm x 0.60mm
1134.058
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.80mm
1134.059
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€9.90
χωρίς ΦΠΑ €7.98
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.40mm
1134.060
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.50mm
1134.061
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.60mm
1134.062
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.80mm
1134.063
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D v6 Heat Break 1.75mm (Throat)
1134.027
This is a replacement HeatBreak for E3D-v6 1.75mm HotEnds. Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve...
€21.70
χωρίς ΦΠΑ €17.50
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.002
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Bowden 24V)
1134.003
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€93.00
χωρίς ΦΠΑ €75.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 12V)
1134.001
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€86.80
χωρίς ΦΠΑ €70.00
Μη Διαθέσιμο
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.004
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€74.40
χωρίς ΦΠΑ €60.00
Σε Απόθεμα
+ −
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity...
€37.20
χωρίς ΦΠΑ €30.00
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.25mm
1134.031
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.30mm
1134.032
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.35mm
1134.033
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.24
χωρίς ΦΠΑ €13.90
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.40mm
1134.034
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Σε Απόθεμα
+ −
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.50mm
1134.122
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original E3D V6 Silicone Sock
1134.014
Silicone Socks for E3D v6 Please note that this is the standard E3D silicone sock that ships with all our V6 and Lite6 HotEnds as of May 2017. If you prefer the classic-style sock it is still available! With these little guys we've made some small but significant changes to make 3D printing...
€2.50
χωρίς ΦΠΑ €2.02
Μη Διαθέσιμο
Original E3D V6 Threaded Heatsink
1134.100
An alternative to Groovemount There are a couple of major flaws with groovemounting (or previous standard HotEnd mounting style): Fit is highly dependent on quality of part machining Fit can become loose from repeated removal and refitting To fight these problems, we're...
€23.00
χωρίς ΦΠΑ €18.55
Σε Απόθεμα
+ −
Original E3D Volcano 1.75mm Starter Pack 12V
1134.009
// <!--[CDATA[ var require = { "baseUrl": "https://e3d-online.com/static/version1507640287/frontend/E3donline/default/en_US" }; // ]]-->// <!--[CDATA[ window.NREUM||(NREUM={}),__nr_require=function(e,n,t){function r(t){if(!n[t]){var...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D Volcano 1.75mm Starter Pack 24V
1134.010
Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...
€49.60
χωρίς ΦΠΑ €40.00
Μη Διαθέσιμο
Original E3D Volcano Eruption Pack 24V
1134.114
Volcano: Print Faster, Stronger, Bigger 01.Faster Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large...
€57.04
χωρίς ΦΠΑ €46.00
Μη Διαθέσιμο
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.40mm
1134.095
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.60mm
1134.096
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 0.80mm
1134.097
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.00mm
1134.098
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Plated Copper Nozzle - 1.75mm x 1.20mm
1134.099
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Nickel-Plated Copper Alloy Nozzles These nozzles are engineered for ultimate high...
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Volcano Silicone Sock
1134.011
Silicone Socks for E3D Volcano Heater Block and Nozzles These socks will keep your heater block clean and free from burnt and blackened plastic. They don’t just keep the block clean, but also keep heat inside the HotEnd and off your print. Made of a heat-resistant, non-stick silicone...
€3.47
χωρίς ΦΠΑ €2.80
Σε Απόθεμα
+ −
Original E3D Water Cooling Kit for Titan Aqua
1134.025
ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing can do....
€120.28
χωρίς ΦΠΑ €97.00
Σε Απόθεμα
+ −
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ