ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

E3D-Online

Ταξινόμηση:
Δημοφιλέστερα
16
Original E3D Brass Volcano Nozzle - 1.75mm x 1.00mm
1134.088
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Titan Replacement Kit - Bearings & Lid
1134.046
This kit contains the new Tritan Titan lid & two new bearings suitable for Titan and Titan Aero. Previous to February 2018, Titan lids were made of polycarbonate and occasional failure was occuring due to the the chemical composition of bearing lubricant. The solution to this is now...
€5.08
χωρίς ΦΠΑ €4.10
Μη Διαθέσιμο
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 1.20mm
1134.094
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Σε Απόθεμα
+ −
Original E3D Stainless Steel V6 Nozzle - 1.75mm x 0.25mm
1134.082
Medical grade and food safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.
€26.47
χωρίς ΦΠΑ €21.35
Μη Διαθέσιμο
Original E3D V6 Hardened Steel Nozzle - 1.75mm x 0.60mm
1134.062
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the...
€29.45
χωρίς ΦΠΑ €23.75
Μη Διαθέσιμο
Original E3D V6 Aluminum Heater Block
1134.107
This heater block works with our New Standard thermistor sensor for V6... Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your E3D-v6 HotEnd, or a Type-K Thermistor cartridge, instead of a...
€23.89
χωρίς ΦΠΑ €19.27
Μη Διαθέσιμο
Original E3D V6 Brass Nozzle - 1.75mm x 0.30mm
1134.054
V6 Brass Nozzles Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of...
€14.76
χωρίς ΦΠΑ €11.90
Μη Διαθέσιμο
Original E3D Brass Volcano Nozzle - 1.75mm x 1.20mm
1134.089
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D SuperVolcano Heater Cartridge 24V 80W
1134.106
These 24V-80W heaters have been designed specifically for the needs of the SuperVolcano HotEnd and provide the much needed power in order to achieve the highest flow rate possible. These have an extra long 47.50mm heater cartridge to fit the fit the geometry of the SuperVolcano Block....
€24.80
χωρίς ΦΠΑ €20.00
Σε Απόθεμα
+ −
Original E3D Groove Mount Bowden Adaptor for 4mm PTFE - 1.75mm Filament
1134.045
This is a neat little solution for quickly and easily converting a direct extruder that would normally accept a groovemount hotend into a bowden extruder. Simply mounts in like a Hot End, but instead accepts our PTFE tubing securely in an embedded bowden coupler. This is a neat little solution...
€9.05
χωρίς ΦΠΑ €7.30
Σε Απόθεμα
+ −
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.40mm
1134.042
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.40mm
1134.090
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Hardened Steel Nozzles Super fast printing nozzles for use with the Volcano block and...
€29.33
χωρίς ΦΠΑ €23.65
Μη Διαθέσιμο
Original E3D V6 Plated Copper Nozzle - 1.75mm x 0.50mm
1134.122
M6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker. Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the...
€17.26
χωρίς ΦΠΑ €13.92
Μη Διαθέσιμο
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.25mm
1134.039
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Original E3D Brass Volcano Nozzle - 1.75mm x 0.80mm
1134.087
NUMBER OF DOTS NOZZLE DIAMETER 0 0.60mm 1 0.80mm 2 1.00mm 3 1.20mm 4 0.40mm Volcano Brass Nozzles These nozzles are used with the Volcano block and packs to print at...
€11.41
χωρίς ΦΠΑ €9.20
Μη Διαθέσιμο
Original E3D Cyclops Brass Nozzle - 1.75mm x 0.30mm
1134.040
Unique, tiny brass nozzles specifically designed for use with the E3D Cyclops+ and old style Cyclops HotEnd. Not compatible with V6 or Volcano systems. Note: compatible with 1.75mm filament only
€15.19
χωρίς ΦΠΑ €12.25
Σε Απόθεμα
+ −
Επόμενα 16 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ