ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Δευτέρα 24/06/2024 (Αγίου Πνεύματος) η εταιρεία θα παραμείνει κλειστή.

3D Printers/CNC/Laser

Ταξινόμηση:
Δημοφιλέστερα
40
Original Prusa Hotend heater cartridge 24V 40W (MK3/S/+)
1145.044
This product is the replacement Hotend heater cartridge 24V 40W. It is ONLY compatible with the MK3/S/+. It is NOT compatible with the MK2/S, MK2.5/S and MINI/+. The  Molex connector  is NOT included and is available separately. This product includes: Hotend heater cartridge 24V 40W...
BrandPRUSA RESEARCH Printer CompatibilityMK3, MK3S, MK3S+
€9.90
χωρίς ΦΠΑ €7.98
Σε Απόθεμα
+ −
1Kg eSun eSilk Rainbow PLA 1.75mm
1212.082
Specification： - 1.75mm Characteristics： As the latest product of eSUN, eSilk-pla is modified by adding materials with bright effect materials into PLA to make more shiny appearance .eSilk-PLA is similar to PLA filament，with good mechanical properties and good toughness. It is...
€25.90
χωρίς ΦΠΑ €20.89
Σε Απόθεμα
+ −
Original Prusa Hotend Thermistor
1145.012
This product includes: Hotend thermistor (1 pcs)   Specifications: Connector: Molex 5057-9402 Cable length: 750 mm
BrandPRUSA RESEARCH Printer CompatibilityMK2.5S, MK2, MK2.5, MK3, MK3S, MK3S+
€11.90
χωρίς ΦΠΑ €9.60
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
L298N V3 x4 Stepper/DC Motor Driver
1215.418
This dual L298N driver module, using ST’s L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit work stably. It can directly drive two 3~30V DC motor. and it provides a 5V output interface (the min input is 6V) to power for 5V...
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
3D Printer J-Head Nozzle 0.4mm
1116.786
3D Printer J-Head Nozzle 0.4mm
€1.13
χωρίς ΦΠΑ €0.91
Μη Διαθέσιμο
1Kg eSun Yellow PLA+ 1.75mm
1212.015
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
1Kg eSun Orange PLA+ 1.75mm
1212.009
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original E3D Water Cooling Kit for Titan Aqua
1134.025
ΠΡΟΣΟΧΗ: Δεν είναι κατάλληλο για χρήση με καθαρό νερό της βρύσης! Αυτό το κιτ μπορεί επίσης να χρησιμοποιηθεί με εκτυπωτές 24V, αλλά θα χρειαστείτε μετατροπέα DC-DC. Instructions Here Water-Cooling: The next step in 3D printing We've reached the limits of what air-cooled 3D printing...
€99.89
χωρίς ΦΠΑ €80.56
Σε Απόθεμα
+ −
Original Bondtech Drivegear kit 1.75mm / 5mm shaft
1143.001
Prusa i3 MK2/S Printable Extruder Parts for Bondtech Drivegear kit https://www.thingiverse.com/thing:2683976 You will need the following parts: 1 x Bondtech Direct Gearset 1 x M3 thread bushing 1 x Thumbscrew assembly (Screw, spring, washer) 1 x Pin 3×20 mm M3 screws Bondtech DualDrive...
€56.90
χωρίς ΦΠΑ €45.89
Σε Απόθεμα
+ −
Original Prusa U-bolts
1145.008
3 U-bolts for holding the LM8UUs on the MK2S Y-carriage. M3 nuts are included.
BrandPRUSA RESEARCH Printer CompatibilityMK2.5S, MK2S, MINI, MK2.5, MK3, MK3S
€7.70
χωρίς ΦΠΑ €6.21
Σε Απόθεμα
+ −
24V Fan 40x40x10mm (2pin)
1256.011
Big air flow. Low noisy. Specifications : Wire:2pin Dimensions: 40X40X10mm Connector:2pin(2.0) Rated Voltage: DC 24V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:10CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:15cm...
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
Original Prusa i3 MK2/s & MK3 Y-Axis Belt
1145.045
Y Axis belt for Original Prusa i3 MK2/S and MK3.
BrandPRUSA RESEARCH Printer CompatibilityMK2S, MK2, MK2.5, MK2.5S, MK3, MK3S, MK3S+
€6.60
χωρίς ΦΠΑ €5.32
Σε Απόθεμα
+ −
1Kg eSun Grey PETG 1.75mm
1212.063
PRODUCT FEATURES 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
Trapezoidal Lead Screw T8-300mm with Brass Nut, Lead 8mm - Pitch 2mm
1116.776
Material: 304 Stainless steel lead screw / Brass nut Screw diameter:8mm Pitch:2mm Lead of thread:8mm Length:300mm
€6.39
χωρίς ΦΠΑ €5.15
Σε Απόθεμα
+ −
MK8 Full Metal Aluminum Alloy Bowden Extruder 1.75MM with NEMA 17 L Bracket Mount Right hand
1116.957
3D Printer MK8 Bowden Extruder. Used for 1.75mm filament, Reprap, Makerbot. Full Metal Aluminum Alloy. Application:for Reprap, for Makerbot, for 1.75MM Filament. Specifications: Material: aluminum alloy Type:right hand Color:black and rose red Size: 5*5*5cm Package List: 1 x MK8...
€11.11
χωρίς ΦΠΑ €8.96
Σε Απόθεμα
+ −
1Kg eSun Red PLA+ 1.75mm
1212.037
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Μη Διαθέσιμο
Stepper Motor 17HS4023 42*42*23mm for Titan Extruder
1215.377
  Size:42*42*23mm Phase: 2 Phase Voltage: 12V Current: 0.7 A/Phase Resistance: 4.0 plusmn 10%Omega/Phase Inductance: 3.2 plusmn 20% mH/Phase Holding Togque: 14 N.cm Insulation Class: B
€12.31
χωρίς ΦΠΑ €9.93
Σε Απόθεμα
+ −
Original E3D Heater Cartridge 24V 40W
1134.051
24v 40w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a metre of...
€8.90
χωρίς ΦΠΑ €7.18
Σε Απόθεμα
+ −
Original Prusa Molex connector (Heater cartridge, heatbed, PSU)
1145.009
This product is the replacement Molex connector for hotend heater cartridge cables, heatbed heater cables, and PSU cables. This product includes: Molex connector (1 pcs) Screws (2 pcs) Specifications: MOLEX 39530-0002 Used for Hotend heater cartridge (MK2/S ,...
BrandPRUSA RESEARCH Printer CompatibilityMINI, MINI+, MK2, MK2.5, MK2.5S, MK2S, MK3, MK3S, MK3S+
€3.00
χωρίς ΦΠΑ €2.42
Σε Απόθεμα
+ −
Kapton Heat Tape 20mm x 30m
1140.729
Polyimide (Kapton) tape is widely used for masking during powder coating, wave soldering, circuit board production, or holding parts in place during hot air rework or repair of electronic components.  
€5.02
χωρίς ΦΠΑ €4.05
Μη Διαθέσιμο
Original Prusa Festo fitting QSM-M5
1145.056
This product includes: Festo fitting QSM-M5 (1 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMMU3, MMU2S, XL
€4.90
χωρίς ΦΠΑ €3.95
Σε Απόθεμα
+ −
0.5Kg eSun Wood PLA 1.75mm
1212.022
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - 1. High quality wood texture - 2. Non toxic and no smelling - 3. No heated bed necessary, sticks well to print bed - 4. Low processing temperature(about 190℃) - 5. Low shrinkage and...
€23.99
χωρίς ΦΠΑ €19.35
Σε Απόθεμα
+ −
1Kg eSun Natural PLA 1.75mm
1212.016
Specification： - 1.75mm (Accuracy:1.7-1.8mm) - 3.00mm (Accuracy:2.9-3.0mm) Characteristics： - extracted and purified from corn grain; - high rigidity, good glossiness and transparency; - suitable for printing larger models; - toughness is 2 times more than the PLA on the market; - no...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
625ZZ Miniature deep groove ball bearing (5*16*5 mm)
1116.747
Type: 625zz Material: Carbon Steel Outer Diameter: 16mm Inner Diameter: 5mm Thickness: 5mm
€0.62
χωρίς ΦΠΑ €0.50
Σε Απόθεμα
+ −
1Kg eSun ePA & Carbon Fiber 1.75mm
1212.031
Features: eSUN ePA-CF Carbon Fiber Filled Nylon Filament, Used in Structural Parts, Tough Parts. 1KG Net (approximately 2.2lbs) Filament with Clear Spool. eSUN ePA-CF 3D Printer Filament Vacuumed Sealed with Desiccant. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended...
€63.00
χωρίς ΦΠΑ €50.81
Μη Διαθέσιμο
12V Fan 90x90x25mm (OEM)
1140.191
Rated Voltage : DC 12V External Material : Plastic Main Color : Black Connector : 2 Pin Size : 90 x 90x 25mm/ 3.5" x 3.5" x 1" (L*W*H) Cable Length : 17cm/ 6.6" Weight : 62g Provides excellent air ventilation for your PC case, computer CPU fan, or other matched radiator....
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
2040 Aluminum Profile Extrusion 1M Length - T-Slot Frame For CNC
1140.954
20 Series Compatible with all 20 Series Fasteners and Accessories Six available T-slots for mounting Ideal for machine guards, enclosures, work benches, displays, and panel mount racks 6105-T5, Clear Anodized Aluminum Length : 1M
€13.89
χωρίς ΦΠΑ €11.20
Σε Απόθεμα
+ −
Aluminum Heater Block Makerbot MK7 MK8 Print Head Hot End Heating Block 20x20x10mm
1140.042
Aluminum Heater Block Makerbot MK7 MK8 Print Head Hot End Heating Block 20x20x10mm
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
1Kg eSun Light Blue PLA+ 1.75mm
1212.040
1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature...
€19.90
χωρίς ΦΠΑ €16.05
Σε Απόθεμα
+ −
Original E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct 24V)
1134.004
The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here...
€62.00
χωρίς ΦΠΑ €50.00
Σε Απόθεμα
+ −
Βίδα M3 25mm - Σταυρός (Stainless Steel Screw M3x25 Round head)
1140.963
Drive Style: Phillips Head Style: Round Stainless Steel
€0.09
χωρίς ΦΠΑ €0.07
Σε Απόθεμα
+ −
0.4mm Makerbot Mk8 3D Printer Extruder Thread Nozzle For 1.75mm Filament
1140.177
Specification: Material: copper (brass) Filament:1.75MM Nozzle: 0.4mm Size:13 x 6mm(L x Dia) Screw thread: M6 Application: makerbot 3D printer extruder.
€1.13
χωρίς ΦΠΑ €0.91
Μη Διαθέσιμο
Original E3D v6 Plated Copper Heater Block
1134.029
Τα nozzle δεν περιλαμβάνονται. Plated Copper-Alloy Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity...
€32.90
χωρίς ΦΠΑ €26.53
Σε Απόθεμα
+ −
KFL08 Trapezoidal Bracket for T8 Lead Screws
1116.982
KFL08 Trapezoidal Bracket for T8 Lead Screws
€3.03
χωρίς ΦΠΑ €2.44
Σε Απόθεμα
+ −
Flexible Coupling Coupler /Shaft 5x5x25 mm
1116.769
3D printer Stepper Motor Flexible Coupling Coupler Size: 5 mm*5mm**25 mm
€2.99
χωρίς ΦΠΑ €2.41
Σε Απόθεμα
+ −
2x United Chemi-Con APXG160ARA221MF80G Capacitor for Creality Faulty Tempratures Readings
1161.001
CR-10S V2.0/V2.1 C4 Replacement Capacitor – 2 Pack Replacement SMD Capacitor for C4 Capacitor on the CR-10S V2.0/V2.1 Boards Information on replacement here (DIY Guide Link on page): CR-10S V2.0/V2.1 Temperature Repair Guaranteed to fix the temperature fluctuation issue Exact...
€1.00
χωρίς ΦΠΑ €0.81
Σε Απόθεμα
+ −
Original E3D Lite6 HotEnd Full Kit - 1.75mm Universal (Bowden 12V)
1134.006
E3D V6   E3D Lite6 Print Performance Max Temperature 400°C+   245°C Print Speed 20 – 100mm/2 20 - 50mm/2 Ease of Use Intermediate Easy Filament Diameter 1.75 or 3mm 1.75mm   Compatibility...
€42.90
χωρίς ΦΠΑ €34.60
Σε Απόθεμα
+ −
Original Prusa Timing pulley T16-2GT
1145.002
This product includes: Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs)
BrandPRUSA RESEARCH Printer CompatibilityMK2, MINI+, MINI, MK2S, MK2.5S, MK2.5, MK3, MK3S, MK3S+, MK4
€5.00
χωρίς ΦΠΑ €4.03
Σε Απόθεμα
+ −
688zz Ball Bearing 8x16x5mm
1116.953
688zz Ball Bearing 8x16x5mm
€0.56
χωρίς ΦΠΑ €0.45
Μη Διαθέσιμο
Επόμενα 40 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ