ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Motors

Ταξινόμηση:
Δημοφιλέστερα
32
L293D Motor Driver Shield - Expansion Board For Arduino
1116.064
L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 12 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also...
€5.46
χωρίς ΦΠΑ €4.40
Σε Απόθεμα
+ −
DC 12V 12000RPM High Speed Large Torque 775 Motor
1116.370
Motor height: 66.3 mm Motor Diameter: 42.3 mm Output shaft diameter: 5 mm Output shaft length: 10 mm Net weight: 418 g Voltage: 12 V Current: 2.5 A Speed: 12000RPM
€14.56
χωρίς ΦΠΑ €11.74
Μη Διαθέσιμο
3V-6V Small DC Motor for Arduino
1116.141
Length: 25mm Diameter: 21mm Shaft: 2mm Axial length: 9mm Voltage: (3-6)V
€0.91
χωρίς ΦΠΑ €0.73
Σε Απόθεμα
+ −
3D Printer A4988 Reprap Stepper Motor Driver Module
1116.078
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
SG90 TowerPro Micro Servo For RC / Arduino
1116.147
Dimension: 22mm x 11.5mm x 22.5mm Operating speed: 0.12second/ 60degree ( 4.8V no load) Stall Torque (4.8V): 17.5oz /in (1kg/cm) Temperature range: -30 to +60 Dead band width: 7usec Operating voltage: 3.0V~7.2V
€4.48
χωρίς ΦΠΑ €3.61
Σε Απόθεμα
+ −
DC 6V - 28V 3A PWM Regulator Motor Speed - Controller Switch
1116.707
    Features: This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of3A to your DC...
€4.48
χωρίς ΦΠΑ €3.61
Σε Απόθεμα
+ −
3CH Servo Tester CCPM
1116.494
There are 3 modes to check servos or ESC: Manual mode: turn the knob with different speed, check the reaction time;  Neutral mode: make the servo go back to the neutral point;  Automatic "window wiper" mode: make the servo swing like a window wipers in the...
€3.70
χωρίς ΦΠΑ €2.98
Σε Απόθεμα
+ −
DRV8825 Stepper Driver Module with Heatsink for Arduino
1116.117
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
DC 10-50V 40A DC Motor Speed Controller - CW CCW Reversible Switch
1140.543
40A high-power governor With 0-100 percentage digital scale positioning Product Name: Micro-EQ839 Brand: Micro Input voltage: DC10-55V (equal to the rated voltage of the motor) Output voltage: Linear under load Maximum current: 60A Continuous current: 40A Speed Type: adjusting...
€18.48
χωρίς ΦΠΑ €14.90
Σε Απόθεμα
+ −
5V 28BYJ-48-5V 4-Phase Stepper Stepper Motor + Driver Board ULN2003 (Green) for Arduino
1116.298
5 lines and 4 phases can be driven by ordinary uln2003 chip; can also be connected in phase 2 development board. Supporting the use of a direct plug and easy to use stepper motor used in the development board. ULN2003 stepper motor driver board: A, B, C, D four-phase LED indicates...
€3.58
χωρίς ΦΠΑ €2.89
Σε Απόθεμα
+ −
V3 Engraver - 3D Printer CNC Shield & Expansion Board A4988 Driver For Arduino
1116.080
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very...
€6.10
χωρίς ΦΠΑ €4.92
Σε Απόθεμα
+ −
6V DC Metal Mini Motor GA12-N20 30RPM Speed
1116.426
Material:Metal Color:Silver Model:GA12-N20 Total Size:33 x 12 x 9mm/1.30 x 0.47 x 0.35""(HxLxW) The fuselage without shaft length:25mm/0.98"" Output shaft length:10mm-4.4mm Working voltage range:DC1.5- 12.0V Nominal voltage:DC6v Rotate speed:30rpm Brand Name: BQLZR...
€6.71
χωρίς ΦΠΑ €5.41
Σε Απόθεμα
+ −
DC Motor Speed Control PWM 10-50V 40A 2000W
1116.708
• 1. This product is suitable for speed control of universal DC motor, production line conveyor belt, pipe exhaust fan, treadmill and so on. • 2. Operating Voltage: DC10V-DC50V • 3. Control Power Rate: 0.01-2000W(Maximum Current: 40A) Different voltage correspond with different power...
€14.88
χωρίς ΦΠΑ €12.00
Σε Απόθεμα
+ −
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
JGA25-370 12V DC Motor - 400RPM
1140.078
Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Free-run speed at 12 V: 399 RPM Free-run current at 12 V: 50 mA Stall current at 12V: 1200 mA Stall torque at 12V: 2.2 kg.cm Gear ratio: 1: 21.3 Reductor size: 19 mm Weight: 84 g
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
28BYJ-48-5V Stepper Motor + DC 5V ULN2003 Stepper Motor Board 4-phase (Blue)
1116.052
Item Description: Diameter: 28mm Voltage: 5V Stepping angle: 5.625 x 1/64 Reduction ratio: 1/64
€4.46
χωρίς ΦΠΑ €3.60
Σε Απόθεμα
+ −
JGY370 DC 12V Reversible High torque Gear Motor (40RPM)
1140.273
Specifications : Model: JGY370 Voltage: DC12V No load speed: 40r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g
€13.44
χωρίς ΦΠΑ €10.84
Σε Απόθεμα
+ −
Car Robot Plastic Tire Wheel + DC Gear Motor for Arduino
1116.140
DC Gear Motor : No load speed (6V): 200RPM ±10% No load current (6V): ≤200mA No load speed (3V): 90RPM ±10% No load current (3V): ≤150mA Voltage: 3-6 V Reduction ratio is 1:48 Tire : Tire Size Center hole: Long 5.3MM, 3.5MM wide Diameter: 66MM Width: 26MM
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
Nema 17 Wantai Stepper Motor,42BYGHW811L20P1-X2, 4800g.cm,2.5A, Flat Shaft 3D Reprap Printer (CE,ROSH,ISO)
1140.001
Part No.: 42BYGHW811L20P1-X2 Frame Size: NEMA17 Step Angle: 1.8 degree Voltage: 3.1 V Current: 2.5 A/phase Resistance: 1.25 Ohm/phase Inductance: 1.8 mH/phase Holding torque: 4800g-cm Rotor inertia: 68 g-cm2 Number of wire leads: 4 Weight:...
€13.64
χωρίς ΦΠΑ €11.00
Σε Απόθεμα
+ −
JGY370 DC 12V Reversible High torque Gear Motor (18RPM)
1140.272
Specifications : Model: JGY370 Voltage: DC12V No load speed: 18r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g Rotor Diameter: 6mm
€13.44
χωρίς ΦΠΑ €10.84
Σε Απόθεμα
+ −
MG90S Micro Metal Gear 9g Servo for Arduino / RC (180 Degrees)
1116.555
Metal Gear Full Ball Bearing Light Weight Less Noise Connector Wire Length 150mm Specifications: Dimensions: 23 x 12.2 x 29mm Operating Speed (4.8V no load): 0.11sec / 60 degrees Operating Speed (6.0V no load): 0.10sec / 60 degrees Stall Torque (4.8V): 2.2...
€5.59
χωρίς ΦΠΑ €4.51
Μη Διαθέσιμο
MG996R Servo - Metal Gear / High Torque Motor for Arduino (180 degrees)
1116.277
Features: Gear Type: All Metal Gears Can perform 180 Degrees turn Operating Speed: 0.17sec / 60 degrees (4.8V no load) Operating Speed: 0.13sec / 60 degrees (6.0V no load) Stall torque:12kg/cm(6V) Operation Voltage : 4.8 - 7.2 V Power Supply: Through External Adapter...
€6.32
χωρίς ΦΠΑ €5.10
Σε Απόθεμα
+ −
6V-24V 3A DC Motor Speed Control Controller - PWM Regulator with Reversible Switch
1140.581
DC Motor Speed Regulator controls the speed of a DC motor by adjusting PWM. The input power range is DC 6-28V Control the forward or reverse direction and the stop of DC motor by button switch. Press the green button, the motor reverses rotates, and release the button, the motor stops. Press the...
€10.07
χωρίς ΦΠΑ €8.12
Σε Απόθεμα
+ −
JGY370 DC 12V Reversible High torque Gear Motor (10RPM)
1140.271
Specifications : Model: JGY370 Voltage: DC12V No load speed: 10r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g
€13.44
χωρίς ΦΠΑ €10.84
Σε Απόθεμα
+ −
DC 10V-50V 40A PWM Motor Speed Controller - CW CCW Reversible Switch
1140.541
Working voltage: DC 10~50V Sustained current: 40A Maximum current: 60A Speed range: 0%~100% CW/CCW: Support Output voltage: Load linear Speed principle: Current regulation Dimension: Approx. 110 x 78 x 38mm
€20.99
χωρίς ΦΠΑ €16.93
Μη Διαθέσιμο
6-30V 6A DC Motor PWM Speed Controller with Control Forward/Reverse Switch CW/CCW
1140.542
Control the speed of a DC motor with this controller With reverse polarity protection, high current protection Input: DC 6~30V Output: Max 80W PWM range: 10% ~ 95% Current: Max 10A (Recommend you to use in 6A) With potentiometer With reversible switch Operating...
€12.31
χωρίς ΦΠΑ €9.93
Σε Απόθεμα
+ −
JGY370 DC 12V Reversible High torque Gear Motor (90RPM)
1140.836
Features: The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation. Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock. The reducer output shaft arranged...
€13.44
χωρίς ΦΠΑ €10.84
Μη Διαθέσιμο
34Pcs Plastic Gear Set for Motors - Pulley/Belts/Racks/Gears
1116.867
34 different kinds of parts and accessories in just one package, which makes it a perfect choice for laboratories, science education, DIY models, RC-airplane/helicopter repair, etc. Includes gear, rack, pulleys, belts, and other transmission parts.
€3.58
χωρίς ΦΠΑ €2.89
Σε Απόθεμα
+ −
800L/H 5m DC 12V Submersible Brushless Motor Water Pump
1215.387
  Made from engineering plastics, energy saving, environmental protection,durable and waterproof grade up to IP68 Stable and reliable running, low power consumption, high efficiency, and has screen effect This DC pump uses advanced electronic components and high-quality...
€14.56
χωρίς ΦΠΑ €11.74
Μη Διαθέσιμο
MG995 Servo - Metal Gear High Speed Torque Motor for Arduino
1116.057
Color: Black Dimensions: 40.8 x 20 x 38mm Weight: 55g Operating Speed: (4.8V no load) 0.20sec 60 degrees Operating Speed: (6.0V no load) 0.19sec 60 degrees Stall Torque: (4.8V) (13kgcm) (180ozin.) Stall Torque: (6.0V) (15kgcm) (208ozin.) Voltage: 4.8-7.2V Operating...
€10.86
χωρίς ΦΠΑ €8.76
Σε Απόθεμα
+ −
L298N 1.5A Dual Channel H-Bridge Stepper / DC Motor PWM Driver Module
1116.373
Description: Motor drive module is ideal for use in battery-powered smart car, toy cars, robots. Supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed. Each can...
€2.80
χωρίς ΦΠΑ €2.26
Σε Απόθεμα
+ −
Dimmer Module 100W with Switch - Speed Regulation Module DIY Kit
1140.578
To module έρχεται σε μορφή kit ,το οποίο χρειάζεται assembly . PCB size: 2*3.3CM Rated power: P=UI;100w=220V*0.45A Model: 100w dimming module Rated power: 100 w Suitable for below 100W AC motor, the dimming light etc control (energy-saving lamps do not support)...
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
Επόμενα 32 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ