Motors

L293D Motor Driver Shield - Expansion Board For Arduino

ΚΩΔΙΚΟΣ: 1116.064

L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 12 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also...

BrandOEM

€5.46

χωρίς ΦΠΑ €4.40

Σε Απόθεμα

+ −

DC 12V 12000RPM High Speed Large Torque 775 Motor

ΚΩΔΙΚΟΣ: 1116.370

Motor height: 66.3 mm Motor Diameter: 42.3 mm Output shaft diameter: 5 mm Output shaft length: 10 mm Net weight: 418 g Voltage: 12 V Current: 2.5 A Speed: 12000RPM

BrandOEM

€14.56

χωρίς ΦΠΑ €11.74

Μη Διαθέσιμο

3V-6V Small DC Motor for Arduino

ΚΩΔΙΚΟΣ: 1116.141

Length: 25mm Diameter: 21mm Shaft: 2mm Axial length: 9mm Voltage: (3-6)V

€0.91

χωρίς ΦΠΑ €0.73

Σε Απόθεμα

+ −

3D Printer A4988 Reprap Stepper Motor Driver Module

ΚΩΔΙΚΟΣ: 1116.078

A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the...

BrandOEM

€3.92

χωρίς ΦΠΑ €3.16

Σε Απόθεμα

+ −

SG90 TowerPro Micro Servo For RC / Arduino

ΚΩΔΙΚΟΣ: 1116.147

Dimension: 22mm x 11.5mm x 22.5mm Operating speed: 0.12second/ 60degree ( 4.8V no load) Stall Torque (4.8V): 17.5oz /in (1kg/cm) Temperature range: -30 to +60 Dead band width: 7usec Operating voltage: 3.0V~7.2V

BrandOEM

€4.48

χωρίς ΦΠΑ €3.61

Σε Απόθεμα

+ −

DC 6V - 28V 3A PWM Regulator Motor Speed - Controller Switch

ΚΩΔΙΚΟΣ: 1116.707

Features: This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of3A to your DC...

BrandOEM

€4.48

χωρίς ΦΠΑ €3.61

Σε Απόθεμα

+ −

3CH Servo Tester CCPM

ΚΩΔΙΚΟΣ: 1116.494

There are 3 modes to check servos or ESC: Manual mode: turn the knob with different speed, check the reaction time; Neutral mode: make the servo go back to the neutral point; Automatic "window wiper" mode: make the servo swing like a window wipers in the...

BrandOEM

€3.70

χωρίς ΦΠΑ €2.98

Σε Απόθεμα

+ −

DRV8825 Stepper Driver Module with Heatsink for Arduino

ΚΩΔΙΚΟΣ: 1116.117

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...

BrandOEM

€6.20

χωρίς ΦΠΑ €5.00

Σε Απόθεμα

+ −

DC 10-50V 40A DC Motor Speed Controller - CW CCW Reversible Switch

ΚΩΔΙΚΟΣ: 1140.543

40A high-power governor With 0-100 percentage digital scale positioning Product Name: Micro-EQ839 Brand: Micro Input voltage: DC10-55V (equal to the rated voltage of the motor) Output voltage: Linear under load Maximum current: 60A Continuous current: 40A Speed Type: adjusting...

BrandOEM

€18.48

χωρίς ΦΠΑ €14.90

Σε Απόθεμα

+ −

5V 28BYJ-48-5V 4-Phase Stepper Stepper Motor + Driver Board ULN2003 (Green) for Arduino

ΚΩΔΙΚΟΣ: 1116.298

5 lines and 4 phases can be driven by ordinary uln2003 chip; can also be connected in phase 2 development board. Supporting the use of a direct plug and easy to use stepper motor used in the development board. ULN2003 stepper motor driver board: A, B, C, D four-phase LED indicates...

BrandOEM

€3.58

χωρίς ΦΠΑ €2.89

Σε Απόθεμα

+ −

V3 Engraver - 3D Printer CNC Shield & Expansion Board A4988 Driver For Arduino

ΚΩΔΙΚΟΣ: 1116.080

This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very...

BrandOEM

€6.10

χωρίς ΦΠΑ €4.92

Σε Απόθεμα

+ −

6V DC Metal Mini Motor GA12-N20 30RPM Speed

ΚΩΔΙΚΟΣ: 1116.426

Material:Metal Color:Silver Model:GA12-N20 Total Size:33 x 12 x 9mm/1.30 x 0.47 x 0.35""(HxLxW) The fuselage without shaft length:25mm/0.98"" Output shaft length:10mm-4.4mm Working voltage range:DC1.5- 12.0V Nominal voltage:DC6v Rotate speed:30rpm Brand Name: BQLZR...

BrandBQLZR

€6.71

χωρίς ΦΠΑ €5.41

Σε Απόθεμα

+ −

DC Motor Speed Control PWM 10-50V 40A 2000W

ΚΩΔΙΚΟΣ: 1116.708

• 1. This product is suitable for speed control of universal DC motor, production line conveyor belt, pipe exhaust fan, treadmill and so on. • 2. Operating Voltage: DC10V-DC50V • 3. Control Power Rate: 0.01-2000W(Maximum Current: 40A) Different voltage correspond with different power...

BrandOEM

€14.88

χωρίς ΦΠΑ €12.00

Σε Απόθεμα

+ −

TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller

ΚΩΔΙΚΟΣ: 1116.340

Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...

BrandOEM

€11.20

χωρίς ΦΠΑ €9.03

Σε Απόθεμα

+ −

JGA25-370 12V DC Motor - 400RPM

ΚΩΔΙΚΟΣ: 1140.078

Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Free-run speed at 12 V: 399 RPM Free-run current at 12 V: 50 mA Stall current at 12V: 1200 mA Stall torque at 12V: 2.2 kg.cm Gear ratio: 1: 21.3 Reductor size: 19 mm Weight: 84 g

BrandOEM

€11.20

χωρίς ΦΠΑ €9.03

Σε Απόθεμα

+ −

28BYJ-48-5V Stepper Motor + DC 5V ULN2003 Stepper Motor Board 4-phase (Blue)

ΚΩΔΙΚΟΣ: 1116.052

Item Description: Diameter: 28mm Voltage: 5V Stepping angle: 5.625 x 1/64 Reduction ratio: 1/64

BrandOEM

€4.46

χωρίς ΦΠΑ €3.60

Σε Απόθεμα

+ −

JGY370 DC 12V Reversible High torque Gear Motor (40RPM)

ΚΩΔΙΚΟΣ: 1140.273

Specifications : Model: JGY370 Voltage: DC12V No load speed: 40r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g

BrandOEM

€13.44

χωρίς ΦΠΑ €10.84

Σε Απόθεμα

+ −

Car Robot Plastic Tire Wheel + DC Gear Motor for Arduino

ΚΩΔΙΚΟΣ: 1116.140

DC Gear Motor : No load speed (6V): 200RPM ±10% No load current (6V): ≤200mA No load speed (3V): 90RPM ±10% No load current (3V): ≤150mA Voltage: 3-6 V Reduction ratio is 1:48 Tire : Tire Size Center hole: Long 5.3MM, 3.5MM wide Diameter: 66MM Width: 26MM

BrandOEM

€3.92

χωρίς ΦΠΑ €3.16

Σε Απόθεμα

+ −

Nema 17 Wantai Stepper Motor,42BYGHW811L20P1-X2, 4800g.cm,2.5A, Flat Shaft 3D Reprap Printer (CE,ROSH,ISO)

ΚΩΔΙΚΟΣ: 1140.001

Part No.: 42BYGHW811L20P1-X2 Frame Size: NEMA17 Step Angle: 1.8 degree Voltage: 3.1 V Current: 2.5 A/phase Resistance: 1.25 Ohm/phase Inductance: 1.8 mH/phase Holding torque: 4800g-cm Rotor inertia: 68 g-cm2 Number of wire leads: 4 Weight:...

BrandWANTAI

€13.64

χωρίς ΦΠΑ €11.00

Σε Απόθεμα

+ −

JGY370 DC 12V Reversible High torque Gear Motor (18RPM)

ΚΩΔΙΚΟΣ: 1140.272

Specifications : Model: JGY370 Voltage: DC12V No load speed: 18r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g Rotor Diameter: 6mm

BrandOEM

€13.44

χωρίς ΦΠΑ €10.84

Σε Απόθεμα

+ −

MG90S Micro Metal Gear 9g Servo for Arduino / RC (180 Degrees)

ΚΩΔΙΚΟΣ: 1116.555

Metal Gear Full Ball Bearing Light Weight Less Noise Connector Wire Length 150mm Specifications: Dimensions: 23 x 12.2 x 29mm Operating Speed (4.8V no load): 0.11sec / 60 degrees Operating Speed (6.0V no load): 0.10sec / 60 degrees Stall Torque (4.8V): 2.2...

BrandOEM

€5.59

χωρίς ΦΠΑ €4.51

Μη Διαθέσιμο

MG996R Servo - Metal Gear / High Torque Motor for Arduino (180 degrees)

ΚΩΔΙΚΟΣ: 1116.277

Features: Gear Type: All Metal Gears Can perform 180 Degrees turn Operating Speed: 0.17sec / 60 degrees (4.8V no load) Operating Speed: 0.13sec / 60 degrees (6.0V no load) Stall torque:12kg/cm(6V) Operation Voltage : 4.8 - 7.2 V Power Supply: Through External Adapter...

BrandOEM

€6.32

χωρίς ΦΠΑ €5.10

Σε Απόθεμα

+ −

6V-24V 3A DC Motor Speed Control Controller - PWM Regulator with Reversible Switch

ΚΩΔΙΚΟΣ: 1140.581

DC Motor Speed Regulator controls the speed of a DC motor by adjusting PWM. The input power range is DC 6-28V Control the forward or reverse direction and the stop of DC motor by button switch. Press the green button, the motor reverses rotates, and release the button, the motor stops. Press the...

BrandOEM

€10.07

χωρίς ΦΠΑ €8.12

Σε Απόθεμα

+ −

JGY370 DC 12V Reversible High torque Gear Motor (10RPM)

ΚΩΔΙΚΟΣ: 1140.271

Specifications : Model: JGY370 Voltage: DC12V No load speed: 10r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g

BrandOEM

€13.44

χωρίς ΦΠΑ €10.84

Σε Απόθεμα

+ −

Επόμενα 24 προϊόντα

Προηγ

1 2 3 4 5 6 7 8

Επόμενο 2 - 10

Φίλτρα Φίλτρα