Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

1215.509
ESP8266 WIFI 4-Channel Relay Module is 4 channel WIFI relay module carried a ESP8266 WIFI module and mature 8 bit MCU, with Professional switching power supply circuit.It could control the relay by Android phone APP within the local area network (LAN).It is easy to set .   2.Features:...
20.15
χωρίς ΦΠΑ 16.25
Σε Απόθεμα
+
1116.727
Screen Size: 64x48 pixels (0.66” Across) Operating Voltage: 3.3V Driver IC: SSD1306 Interface: IIC (I2C) IIC Address: 0x3C or 0x3D
12.31
χωρίς ΦΠΑ 9.93
Σε Απόθεμα
+
1116.410
Brand Name: WeMos Model Number: DHT22 Shield Install Style: Plug-in Temperature: -40~80°C (±0.5°C) Humidity: 0-99.9%RH (±2%RH)
10.75
χωρίς ΦΠΑ 8.67
Σε Απόθεμα
+
1116.253
This is a breadboard for the LOLIN NodeMCU Development Board ESP8266-12E for Arduino IDE see other listing Please note this has a pin spacing of 28MM between the rows. This is compatible with the LOLIN NodeMCU not the DOIT device    
5.59
χωρίς ΦΠΑ 4.51
Σε Απόθεμα
+
1116.413
MP180 temperature and pressure shield for use with the Wemos D1 Mini IOT Device! Use with your Wemos D1 Mini to sense the world around you. For example, use this shield to create a small weather station that you can access over your smart phone using the Blynk app! Features:...
5.37
χωρίς ΦΠΑ 4.33
Σε Απόθεμα
+
1140.343
This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor. The temperature and humidity of ESP8266 are uploaded to the server. Support 3.7 v-12v DC supply (3.7 v lithium battery). It can be used as a temperature and humidity collection...
5.26
χωρίς ΦΠΑ 4.24
Σε Απόθεμα
+
1140.193
Description This WIFI relay based on AI-Thinker ESP-01S WIFI module. It is designed for smart home, Internet of thing and other DIY project. With this smart relay, you will easy to DIY your smart switch to control any device by your phone anywhere. We support the APP and LUA source code. We had...
4.48
χωρίς ΦΠΑ 3.61
Σε Απόθεμα
+
1140.443
Features I2C interface Power supply voltage: VM=15V max Output current: Iout=1.2A(average) / 3.2A (peak) Standby control to save power CW/CCW/short brake/stop motor control modes Pins D1 mini Shield D1...
4.38
χωρίς ΦΠΑ 3.53
Σε Απόθεμα
+
1116.559
Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H) Drive part...
4.03
χωρίς ΦΠΑ 3.25
Σε Απόθεμα
+
1116.411
Brand Name: WeMos Model Number: Micro SD Shield Install Style: Plug-in Pins: D5: CLK D6: MISO D7: MOSI D8: CS
3.81
χωρίς ΦΠΑ 3.07
Σε Απόθεμα
+
1116.412
Connects DS18B20 to Wemos D1 Mini / D1 Mini Pro Use with a D1 Mini / D1 Mini Pro to sense temperature. Use this shield to monitor temperatures remotely and either serve a webpage, or upload to a remote server. The DS18B20 is very commonly used device with many different...
3.70
χωρίς ΦΠΑ 2.98
Σε Απόθεμα
+
1116.409
NO: 5A(250VAC/30VDC), 10A(125VAC), MAX:1250VA/150W NC: 3A(250VAC/30VDC), MAX:750VA/90W Pin: D1 This device requires 5V on the 5V pin, and can take 3.3V or 5V input on pin D1 to trigger relay.
3.36
χωρίς ΦΠΑ 2.71
Σε Απόθεμα
+
1116.408
Model Number: DHT11 Shield Install Style: Plug-in
3.03
χωρίς ΦΠΑ 2.44
Σε Απόθεμα
+
1140.662
  This RGB LED control module is based on ESP-01/ 01S. You can easily control your WS2812 RGB LED ring with it. The module supports Arduino IDE programming, so it is possible to DIY your lighting control. Specifications Main chip: ESP01/ ESP01S (the module does not include...
2.12
χωρίς ΦΠΑ 1.71
Σε Απόθεμα
+
1140.444
This is a double socket (dual base) that provides more space for more modules.This module was designed to work with the D1 Mini IoT Board. Features: Dual bases for all Wemos D1 Mini modules and shields Duplicates I/O and power   Package Included:...
1.44
χωρίς ΦΠΑ 1.16
Σε Απόθεμα
+
1116.851
Description: This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module. As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping, this breadboard adapter will help you...
1.12
χωρίς ΦΠΑ 0.90
Σε Απόθεμα
+
1140.445
Brand: WeMos This is ProtoBoard shield for WeMos D1 Mini. Package included: 1 x ProtoBoard Shield 2 x Long female pin 2 x Short female pin 2 x Normal pin
0.94
χωρίς ΦΠΑ 0.76
Σε Απόθεμα
+
Φίλτρα Φίλτρα