ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Motors

Ταξινόμηση:
Αλφαβητικά - Ω ως Α
96
VNH2SP30 30A Stepper Motor Driver module for Arduino
1215.784
Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown
€11.76
χωρίς ΦΠΑ €9.48
Σε Απόθεμα
+ −
V3 Engraver - 3D Printer CNC Shield & Expansion Board A4988 Driver For Arduino
1116.080
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very...
€6.10
χωρίς ΦΠΑ €4.92
Σε Απόθεμα
+ −
USB Small Water Pump with Cable
1256.133
Product Name: Water Pump Function: Pumping water Product name :USB one-meter line dc silent small pump micro mini submersible pump Main USES: pumping water Weight: 20 g Material: PUC
€2.79
χωρίς ΦΠΑ €2.25
Σε Απόθεμα
+ −
ULN2003 Stepper Motor Driver Board Module 5V for Arduino (Green PCB Board)
1116.297
ULN2003 Driver Board: A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
ULN2003 4-Phase Stepper Driver Module (Blue PCB Board)
1116.268
Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% (25℃) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque:...
€1.70
χωρίς ΦΠΑ €1.37
Σε Απόθεμα
+ −
TYJ50-8A7 Microwave Turntable Turn Table Synchronous Motor D Shaft 4 RPM
1215.171
Type: CW/CCW Material: Metal + Plastic Voltage: AC 220-240V Frequency: 50Hz Power: 4W Speed: 4r/min Motor Size: Diameter: 47mm Depth: 17mm
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
TMC2209 Stepper Motor Driver v2.0
1256.230
Features: Ultra quiet Large heat sink,good heat dissipation Support sensorless-homing function. Support uart mode by set jumper caps instead of welding on mks gen L V2.0,skr1.3/1.4,mks sgen L. Parameter: Default current:0.88a Recommend current:1.72a(at most)...
€8.41
χωρίς ΦΠΑ €6.78
Σε Απόθεμα
+ −
TMC2208 Stepper Motor Driver
1215.411
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited...
€14.56
χωρίς ΦΠΑ €11.74
Σε Απόθεμα
+ −
TB6560 3A Stepper Motor Driver (Single Axis) - CNC Router Stepper Controller
1116.340
Size:75*50*35(mm)(LxWxH) / 2.95''x1.96''x1.37'' (approx) Rated maximum output: ± 3A, peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and...
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
Swivel Round Ball - Wheel Universal Transfer for DIY
1116.142
Specifications： Material：metal Color：silver Hole diameter：4mm Hole distance size：40mm Ball diameter：15mm Size：48x32x20mm Application：small machinery, trolleys, furniture and rack, etc. Note： The wheel accurately using the method is to install the bead up, if it is...
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
Stepper Motor Driver Expansion Board for DRV8825/A4988
1215.042
Size: 42*42*15mm  Fixed: 3mm  Pitch: 1400*1400mil (35.56*35.56mm)  Logic voltage: 5V  Input voltage: 12-30V  Interface: direction, enable, speed  Applicable modules: A4988, DRV8825  Note : Please pay attention to the direction when installing the driver module,...
€6.04
χωρίς ΦΠΑ €4.87
Σε Απόθεμα
+ −
Stepper Motor 17HS4023 42*42*23mm for Titan Extruder
1215.377
  Size:42*42*23mm Phase: 2 Phase Voltage: 12V Current: 0.7 A/Phase Resistance: 4.0 plusmn 10%Omega/Phase Inductance: 3.2 plusmn 20% mH/Phase Holding Togque: 14 N.cm Insulation Class: B
€12.31
χωρίς ΦΠΑ €9.93
Σε Απόθεμα
+ −
Short U-Shaped Servo Bracket PTZ - DIY Robot Mount
1140.302
Name: Short U-shaped Steering Bracket Material: 2mm hard aluminum Size: (approx)52x 42.5x 25.5mm Weight: 17g
€1.49
χωρίς ΦΠΑ €1.20
Σε Απόθεμα
+ −
SG90 TowerPro Micro Servo For RC / Arduino
1116.147
Dimension: 22mm x 11.5mm x 22.5mm Operating speed: 0.12second/ 60degree ( 4.8V no load) Stall Torque (4.8V): 17.5oz /in (1kg/cm) Temperature range: -30 to +60 Dead band width: 7usec Operating voltage: 3.0V~7.2V
€4.48
χωρίς ΦΠΑ €3.61
Σε Απόθεμα
+ −
SG90 Servo Motor Bracket Frame
1116.536
Features : This bracket is used to mount the servo motor (SG90) to your system. Transparent acrylic perspex plastic. Good Quality Bracket  
€1.12
χωρίς ΦΠΑ €0.90
Σε Απόθεμα
+ −
Servo bracket Pan/Tilt Camera Platform for FPV Systems – MG995 MG996
1116.338
This is metalic pan tilt servo bracket for MG995 and MG996 Servo Motors. It can be used for mounting other sensors such as Ultra-sonic Distance Sensor modules. The Servo bracket system is supplied in un-assembled form and requires user to install servo motors and camera. Applications...
€4.27
χωρίς ΦΠΑ €3.44
Σε Απόθεμα
+ −
Servo Arm Plastic Set MG995/MG996
1215.359
  Unit: Set Color: Black Material: Plastic
€1.66
χωρίς ΦΠΑ €1.34
Σε Απόθεμα
+ −
Savox SC-1268MG Digital Servo
1124.001
Dimensions(mm):  40.3x20.2x37.2 Weight(g):  62.0 Speed(@4.8V sec/60):  .15 Torque(@4.8V oz-in):  160.0 Speed(@6.0V sec/60):  .13 Torque(@6.0V oz-in):  208.3 Speed(@7.4V sec/60):  .11 Torque(@7.4V oz-in):  347.2 Gear:  Unique Steel...
€90.00
χωρίς ΦΠΑ €72.58
Μη Διαθέσιμο
Rubber Tire 65mm
1140.308
Rubber Tire 65mm
€1.35
χωρίς ΦΠΑ €1.09
Σε Απόθεμα
+ −
Rubber Tire 42mm
1140.019
Wheel diameter: 42MM Wheel width: 18.7MM Tire material: Rubber Color: black Wheel weight: 19.4g/pc
€1.13
χωρίς ΦΠΑ €0.91
Σε Απόθεμα
+ −
Remote Controlled Stepper Motor Driver with Adjustable Speed for Bipolar Steppers (4 wires)
1140.794
Description: Input Voltage: DC4 ~ 6V / 300 ~ 500mA (so we can input by any battery ( not Included ), or usb power supply) Motor type to be guided: Phases 2 (3-24 V of the stepper motor can drive the rotation, but in different torque) Speed Adjustment: 9 levels Can adjust the with the...
€13.14
χωρίς ΦΠΑ €10.60
Σε Απόθεμα
+ −
RDS3115MG Metal Gear Servo for Robots
1116.869
RDS3115 digital metal robot servo One long U metal bracket 1 short metal U bracket 1 Metal Servo Arm 25 tons 1 Metal Servo Arm Drive A set screw (Figure) Size : 40 * 20 * 40.5 (servo)64 * 55.6 * 20 ( fabricated metal bracket size) Weight: 60 g...
€22.38
χωρίς ΦΠΑ €18.05
Σε Απόθεμα
+ −
PG42-775 24V 90RPM 27kg/cm High Torque Planetary Gear Motor with 42mm Gearbox
1215.296
Model : PG42-775 Voltage : 24V No Load Speed : 90 RPM No Load Current : 500mA Load Current : 3.5A Load Torque : 27kg/cm Stall Torque : 135kg/cm Stall Current : 20A
€69.44
χωρίς ΦΠΑ €56.00
Σε Απόθεμα
+ −
PCA9685 16-Channel PWM Servo Motor Driver - I2C Module For Arduino Robot
1116.288
You want to make a robot, When we saw this chip, we quickly realized what an excellent add-on this would be. Using only two pins, control 16 free-running PWM outputs! I2C input, control 16 PWM output, you can control the 16 way servo motor. Specifications: Frequency:...
€7.28
χωρίς ΦΠΑ €5.87
Σε Απόθεμα
+ −
Nema 17 Wantai Stepper Motor,42BYGHW811L20P1-X2, 4800g.cm,2.5A, Flat Shaft 3D Reprap Printer (CE,ROSH,ISO)
1140.001
Part No.: 42BYGHW811L20P1-X2 Frame Size: NEMA17 Step Angle: 1.8 degree Voltage: 3.1 V Current: 2.5 A/phase Resistance: 1.25 Ohm/phase Inductance: 1.8 mH/phase Holding torque: 4800g-cm Rotor inertia: 68 g-cm2 Number of wire leads: 4 Weight:...
€13.64
χωρίς ΦΠΑ €11.00
Σε Απόθεμα
+ −
Nema 17 Short Stepper - 0.09Nm 1.8 degree OK42STH22-0804AC
1256.127
Step Angle(degrees):1.8 Holding Torque:9mn.m Current / Phase:0.8amp Power: 2.64 VDC
€12.31
χωρίς ΦΠΑ €9.93
Σε Απόθεμα
+ −
Nema 17 Aluminum Plate Bracket for 2020/2040 Extrusion
1256.136
Type : 42 stepper motor bracket Material : Aluminum Thickness : 4mm  
€2.68
χωρίς ΦΠΑ €2.16
Σε Απόθεμα
+ −
Multifunction Servo Bracket PTZ - DIY Robot Mount
1140.303
Name: Multifunctional steering bracket Material: 2mm hard aluminum Size: 58x 37x 25.5mm Weight: 15.5g
€2.48
χωρίς ΦΠΑ €2.00
Σε Απόθεμα
+ −
MP-15RM 10W Magnetic Drive Pump
1215.675
Specifications: Type: MP-15RM Maximum capacity: 16L/MIN Standard capacity: 8L/MIN Maximum head: 2.4M Standard head: 1.5M Motor: 10W 220V-240V/50HZ It is chinese plug Connection: 1/2" thread Max permissible fluid temperature: 80 degre Self-priming: NO Working...
€69.44
χωρίς ΦΠΑ €56.00
Σε Απόθεμα
+ −
Mounting brackets for DC12V/24V Linear Actuator Motors (2pcs)
1256.302
Mounting brackets for DC12V/24V Linear Actuator Motors (2pcs)
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
Motor Bracket L Shaped Metal base Holder for 25mm Maotor - JGA25-370
1215.392
  Motor Bracket L Shaped Mounting Metal base Holder for 25mm motor  Alloy 3mm
€2.46
χωρίς ΦΠΑ €1.98
Σε Απόθεμα
+ −
Mini DC Gear Motor 12V 9RPM - Reversible
1256.391
Rated voltage : DC 12V No load speed : 9rpm / min The diameter of the shaft is 7mm Direction of rotation of the motor: CW Or CCW Support Reversed; Control the clockwise or counterclockwise rotation of the motor by changing the way the positive and negative electrodes are connected...
€11.90
χωρίς ΦΠΑ €9.60
Μη Διαθέσιμο
Micro vacuum pump ZR370-03PM negative pressure pump self-priming
1256.665
product description Micro air pump refers to the small size, the working medium is gaseous. The main purpose is divided into: micro negative pressure pump, micro vacuum pump, micro gas circulation pump, wrist electronic sphygmomanometer air pump, micro air pump, micro gas sampling pump,...
€3.92
χωρίς ΦΠΑ €3.16
Σε Απόθεμα
+ −
Micro 3.5V DC Coreless Motor - 7*16MM
1140.020
DC coreless micro motor, cylinder shape, magnetic, 2 wire connector, used for model helicopter and other RC aircraft toys. Size:7*16mm
€1.55
χωρίς ΦΠΑ €1.25
Μη Διαθέσιμο
MG996R Servo - Metal Gear / High Torque Motor for Arduino (180 degrees)
1116.277
Features: Gear Type: All Metal Gears Can perform 180 Degrees turn Operating Speed: 0.17sec / 60 degrees (4.8V no load) Operating Speed: 0.13sec / 60 degrees (6.0V no load) Stall torque:12kg/cm(6V) Operation Voltage : 4.8 - 7.2 V Power Supply: Through External Adapter...
€6.32
χωρίς ΦΠΑ €5.10
Σε Απόθεμα
+ −
MG995 Servo - Metal Gear High Speed Torque Motor for Arduino
1116.057
Color: Black Dimensions: 40.8 x 20 x 38mm Weight: 55g Operating Speed: (4.8V no load) 0.20sec 60 degrees Operating Speed: (6.0V no load) 0.19sec 60 degrees Stall Torque: (4.8V) (13kgcm) (180ozin.) Stall Torque: (6.0V) (15kgcm) (208ozin.) Voltage: 4.8-7.2V Operating...
€10.86
χωρίς ΦΠΑ €8.76
Σε Απόθεμα
+ −
MG90S Micro Metal Gear 9g Servo for Arduino / RC (360 Degrees)
1116.556
Metal Gear Full Ball Bearing Light Weight Less Noise Connector Wire Length 150mm Specifications: Dimensions: 23 x 12.2 x 29mm Operating Speed (4.8V no load): 0.11sec / 60 degrees Operating Speed (6.0V no load): 0.10sec / 60 degrees Stall Torque...
€7.28
χωρίς ΦΠΑ €5.87
Σε Απόθεμα
+ −
MG90S Micro Metal Gear 9g Servo for Arduino / RC (180 Degrees)
1116.555
Metal Gear Full Ball Bearing Light Weight Less Noise Connector Wire Length 150mm Specifications: Dimensions: 23 x 12.2 x 29mm Operating Speed (4.8V no load): 0.11sec / 60 degrees Operating Speed (6.0V no load): 0.10sec / 60 degrees Stall Torque (4.8V): 2.2...
€5.59
χωρίς ΦΠΑ €4.51
Μη Διαθέσιμο
MG90D 13g Metal Gear Digital Servo
1140.759
Description: Brand Name: TowerPro Item Name: MG90D Gear Type: Metal gear Servo Type: Digital Weight: 13g Dimension: 22.8×12×28.1mm Stall Torque: 2.1kg/cm (4.8v) ; 2.5kg/cm (6.0V) Operation Speed: 0.13sec/60degree (4.8V); 0.11sec/60degree (6.0V) Operation Voltage:...
€5.70
χωρίς ΦΠΑ €4.60
Σε Απόθεμα
+ −
Metal Servo Arm For Futaba MG995 MG996
1116.538
Material：CNC Aluminium Length: ：35mm Adjustable type servo arm 25T Spine for Futaba and Power HD Servos Includes two steel bolts to secure the split-clamp onto the servo output M3 Threads
€2.86
χωρίς ΦΠΑ €2.31
Σε Απόθεμα
+ −
Metal Disk - Servo Arm for MG995 MG996R
1116.537
Adjustable type servo arm 4 M3 tapped mounting holes Easy to repair Suitable for Hitec, Parallax, Futaba and other brands (40 × 20 × 36mm) standard servos Color: Silver Material: CNC Aluminium Mounting Hole Spacing: approx. 14mm Servo disc diameter: approx.20mm
€1.55
χωρίς ΦΠΑ €1.25
Σε Απόθεμα
+ −
Makerbot MK7 / MK8 Heat Sink 40x40x11
1140.040
HR0739 Makerbot accessories MK7 / MK8 heat sink 40 * 40 * 11 Center hole goods size : 12 mm Screw mounting holes 3 mm Mounting holes from 31 mm Fin length 40 mm width 40 mm 11 mm thick
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
Long U-Shaped Servo Bracket PTZ - DIY Robot Mount
1140.296
Name: Long U-Shaped steering bracket Material: 2mm hard aluminum Size: 56*65*25mm Weight: 23g
€1.57
χωρίς ΦΠΑ €1.27
Σε Απόθεμα
+ −
Linear actuator DC 24V 25mm Stroke 9mm/s 900N
1116.283
Input 24VDC Load 900N/50kg Speed 9mm per sec Inner tube material Aluminum Alloy Worm Gear Metal gear Stroke length 25mm Color Silver Operation temperature -26 ~ +65 degree
€54.56
χωρίς ΦΠΑ €44.00
Σε Απόθεμα
+ −
L9110S H-bridge Stepper Motor / Dual DC Motor Driver Controller Board For Arduino
1116.135
Onboard two the L9110S motor control chip The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor The module input voltage :2.5-12V The 800mA continuous current output capability per channel Features : Low static work current Power supply...
€2.64
χωρίς ΦΠΑ €2.13
Σε Απόθεμα
+ −
L298N V3 x4 Stepper/DC Motor Driver
1215.418
This dual L298N driver module, using ST’s L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit work stably. It can directly drive two 3~30V DC motor. and it provides a 5V output interface (the min input is 6V) to power for 5V...
€13.43
χωρίς ΦΠΑ €10.83
Σε Απόθεμα
+ −
L298N 1.5A Dual Channel H-Bridge Stepper / DC Motor PWM Driver Module
1116.373
Description: Motor drive module is ideal for use in battery-powered smart car, toy cars, robots. Supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed. Each can...
€2.80
χωρίς ΦΠΑ €2.26
Σε Απόθεμα
+ −
L293D Wifi Motor Drive Shield Module For NodeMcu ESP8266
1116.559
Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H) Drive part...
€4.03
χωρίς ΦΠΑ €3.25
Σε Απόθεμα
+ −
L293D Motor Driver Shield - Expansion Board For Arduino
1116.064
L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 12 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also...
€5.46
χωρίς ΦΠΑ €4.40
Σε Απόθεμα
+ −
L-shaped Servo Bracket PTZ - Robot Mount For RC Model
1140.306
Name: L-shaped Steering Bracket Material: 2mm hard aluminum Color: Black, Silver Size: (approx)35x 30mm Weight: 10g
€1.49
χωρίς ΦΠΑ €1.20
Σε Απόθεμα
+ −
L-Bracket JGY-370 Motor Mount
1215.585
Suitable for mounting the JGY-370 series of geared motors.
€2.68
χωρίς ΦΠΑ €2.16
Μη Διαθέσιμο
L-Bracket for 775 Motor Mount
1215.587
Metal sheet bracket suitable for mounting the 775 motor series.
€2.68
χωρίς ΦΠΑ €2.16
Σε Απόθεμα
+ −
L-Bracket for 37mm Geared Motor Mount
1215.588
Suitable for mounting the 37mm Eccentric motors etc.
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
L-Bracket 775 and 795 Motor Mount
1215.586
Sheet metal suitable for mounting 775 and 795 series motors.
€2.68
χωρίς ΦΠΑ €2.16
Σε Απόθεμα
+ −
KS-3518 Full Metal Digital Servo (Waterproof)
1116.837
Dimension : 40mm x 19mm x 43mm Weight : 55g Operating Speed : 0.17sec / 60 degrees (4.8V no load) Operating Speed : 0.13sec / 60 degrees (7.2V no load) Stall Torque : 12 kg-cm (180.5 oz-in) at 4.8V Stall Torque : 15kg-cm (208.3 oz-in) at 7.2V Operation Voltage : 4.8 -...
€29.76
χωρίς ΦΠΑ €24.00
Σε Απόθεμα
+ −
KPM27C 6V Micro pump
1140.937
Rated voltage: DC6.0V Rated Current: <430mA Inflation time: <10 S (From 0 to 300 mmHg in a 500CC tank.) Air flow without load: >1.8LPM Max. Pressure: >400mmHg Leakage: Max 3 mmHg/min from 300mmHg at 500CC tank. Noise level: 63dB (30cm away) Apply for Air
€6.82
χωρίς ΦΠΑ €5.50
Σε Απόθεμα
+ −
JX PS-5521MG 20KG Large Torque Metal Gear Analog Servo For RC Robot
1140.079
Weight: 85g Size:40.5x40.3x20mm Maximum Angle: 90° Gear: Metal Voltage:4.8V-6V Dead band: 7μs 1520μs / 50hz Operating Speed (4.8V): 0.18 sec/60° Operating Speed (6V): 0.16 sec/60° Stall Torque (4.8V): 17.25 kg.cm (239.55oz/in) Stall Torque (6V): 20.32 kg-cm (281.89...
€26.87
χωρίς ΦΠΑ €21.67
Σε Απόθεμα
+ −
JGY370 DC 12V Reversible High torque Gear Motor (90RPM)
1140.836
Features: The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation. Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock. The reducer output shaft arranged...
€13.44
χωρίς ΦΠΑ €10.84
Μη Διαθέσιμο
JGY370 DC 12V Reversible High torque Gear Motor (40RPM)
1140.273
Specifications : Model: JGY370 Voltage: DC12V No load speed: 40r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g
€13.44
χωρίς ΦΠΑ €10.84
Σε Απόθεμα
+ −
JGY370 DC 12V Reversible High torque Gear Motor (18RPM)
1140.272
Specifications : Model: JGY370 Voltage: DC12V No load speed: 18r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g Rotor Diameter: 6mm
€13.44
χωρίς ΦΠΑ €10.84
Σε Απόθεμα
+ −
JGY370 DC 12V Reversible High torque Gear Motor (10RPM)
1140.271
Specifications : Model: JGY370 Voltage: DC12V No load speed: 10r/min Output torque: 5.6kg.cm Rated current: 0.06A Weight: 163g
€13.44
χωρίς ΦΠΑ €10.84
Σε Απόθεμα
+ −
JGY25-370 12V DC Motor - 250RPM
1140.268
Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Free-run speed at 12 V: 250 RPM Free-run current at 12 V: 50 mA Stall current at 12V: 1200 mA Stall torque at 12V: 3.8 kg.cm Gear ratio: 1:35 Reductor size: 21 mm Weight: 85 g
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
JGB37-555 Reciprocating Linear Motor DC 12V 89RPM - Reduction Actuator
1256.394
Speed : 89RPM No Load Current : 200mA Load Current : 1.2A Torque : 1.12kg/cm Stall Torque : 3kg/cm Stall Current : 6.5A
€63.84
χωρίς ΦΠΑ €51.48
Σε Απόθεμα
+ −
JGB37-555 Reciprocating Linear Motor DC 12V 19RPM - Reduction Actuator
1256.395
Speed : 19RPM No Load Current : 200mA Load Current : 1.2A Torque : 5.4kg/cm Stall Current : 6.5A
€63.84
χωρίς ΦΠΑ €51.48
Σε Απόθεμα
+ −
JGA25-370 6V DC Motor - 300RPM with Speed Encoder
1215.005
Voltage: 6.0V DC Shaft diameter: 4mm  Length: 12mm No-load Speed: 300RPM (0.13A) Max Efficiency: 0.7kg.cm/245rpm/1.2W/(0.4A) Max Power: 1.8kg.cm/160rpm/2W/(0.8A) Stall Torque: 3.6kg.cm (2.7A) Retarder Reduction Ratio: 1 : 20
€14.11
χωρίς ΦΠΑ €11.38
Σε Απόθεμα
+ −
JGA25-370 6V DC Motor - 210RPM with Speed Encoder
1215.004
Voltage: 6.0V DC Shaft diameter: 4mm  Length: 12mm No-load Speed: 210RPM (0.13A) Max Efficiency: 2.0kg.cm/170rpm/2.0W/(0.60A) Max Power: 5.2kg.cm/110rpm/3.1W/(1.10A) Stall Torque: 10kg.cm (3.2A) Retarder Reduction Ratio: 1 :34
€14.11
χωρίς ΦΠΑ €11.38
Σε Απόθεμα
+ −
JGA25-370 6V DC Motor - 100RPM with Speed Encoder
1215.003
Voltage: 6.0V DC Shaft diameter: 4mm  Length: 12mm No-load Speed: 100RPM (0.13A) Max Efficiency: 1.0kg.cm/80rpm/1.7W/(0.5A) Max Power: 3.0kg.cm/55rpm/2.8W/1.0A Stall Torque: 6.5kg.cm (3.0A) Retarder Reduction Ratio: 1 : 75
€14.11
χωρίς ΦΠΑ €11.38
Σε Απόθεμα
+ −
JGA25-370 24VDC MOTOR - 7.5 RPM
1215.532
Workable : 12-36V Rated : 24V Speed : 7.5 RPM Load Torque 9.5 kg/cm Current : 70mA Stall Torque : 47 kg/cm  Current : 220mA
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
JGA25-370 12V DC Motor - 50RPM
1140.270
Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Rotor Diameter: 4mm Free-run speed at 12 V: 50 RPM Free-run current at 12 V: 50 mA Stall current at 12 V: 1200 mA Stall torque at 12 V: 18 kg.cm Gear ratio: 1:171 Reductor size: 25 mm Weight: 91 g
€9.99
χωρίς ΦΠΑ €8.06
Σε Απόθεμα
+ −
JGA25-370 12V DC Motor - 400RPM
1140.078
Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Free-run speed at 12 V: 399 RPM Free-run current at 12 V: 50 mA Stall current at 12V: 1200 mA Stall torque at 12V: 2.2 kg.cm Gear ratio: 1: 21.3 Reductor size: 19 mm Weight: 84 g
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
JGA25-370 12V DC Motor - 37RPM
1140.269
Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Free-run speed at 12 V: 37 RPM Free-run current at 12 V: 50 mA Stall current at 12 V: 1200 mA Stall torque at 12 V: 14 kg.cm Gear ratio: 1:226 Reductor size: 25 mm Weight: 92 g
€8.95
χωρίς ΦΠΑ €7.22
Σε Απόθεμα
+ −
JGA25-370 12V DC Motor - 22RPM
1140.267
Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Rotor Diameter: 4mm Free-run speed at 12 V: 22 RPM Free-run current at 12 V: 50 mA Stall current at 12 V: 1200 mA Stall torque at 12 V: >24 kg·cm Gear ratio: 1:377 Reductor size: 27 mm Weight: 94 g
€11.20
χωρίς ΦΠΑ €9.03
Σε Απόθεμα
+ −
JGA25-370 12V DC Motor - 108RPM
1140.266
Operating voltage: between 6 V and 18 V Nominal voltage: 12 V Free-run speed at 12 V: 108 RPM Free-run current at 12 V: 50 mA Stall current at 12 V: 1200 mA Stall torque at 12 V: 8.4 kg.cm Gear ratio: 1:78 Reductor size: 23 mm Weight: 88 g
€11.20
χωρίς ΦΠΑ €9.03
Μη Διαθέσιμο
HJ Digital Servo Tester/ESC Consistency Tester For Servo
1215.303
Brand: HJ  Material: Plastic  Input voltage: DC 5~6V  Output signal width: 800~2200us  Color: Blue + black  Button the Select (Note: the key switch function, circulation patterns)  S-1 manual mode (Manual)  S-2-bit mode (Neutral)  S-3 automatic mode (Automatic)...
€12.87
χωρίς ΦΠΑ €10.38
Μη Διαθέσιμο
Heng Long 1/16 3938-1 Brushed Motor - Steel Gearbox For 1/16 RC Tank
1256.431
Item Name: Brushed Motor The item is brand-new and compatible with: Heng Long 1/16 3938-1 Russia T90 Model:Heng Long Type:Toy Electronic Accessories Length: About 51.22mm Shaft Diameter: About 2.3mm Shaft Length: About 11.93mm Motor Gear Diameter: About 7.02mm...
€20.15
χωρίς ΦΠΑ €16.25
Σε Απόθεμα
+ −
Heat Sink 40x40x11 for MK7 / MK8 Extruder (Nema17)
1140.034
DESCRIPTION MK7/MK8 Heat Sink for 3D Printer Specifications : Center hole: 12 mm  Screw mounting holes: 3 mm Dimensions: 40x40x11mm
€2.01
χωρίς ΦΠΑ €1.62
Σε Απόθεμα
+ −
Frame Mount Bracket with Screws For DC Motors N20
1116.427
Screws included. Details: 1. Dimension: 25*11.5*11.5 2. Material: ABS plastic 3. Hole Pitch:18mm 4. Hole: 2mm
€0.78
χωρίς ΦΠΑ €0.63
Σε Απόθεμα
+ −
Flexible Coupling Coupler /Shaft 6.35x8x25 mm
1140.826
3D printer Stepper Motor Flexible Coupling Coupler Size: 6.35 mm*8mm**25 mm
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
FLEXIBLE COUPLING COUPLER /SHAFT 6.35X10X25 MM
1215.558
3D printer Stepper Motor Flexible Coupling Coupler Size:6.35 mm*10mm**25 mm
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
Flexible Coupling Coupler /Shaft 5x5x25 mm
1116.769
3D printer Stepper Motor Flexible Coupling Coupler Size: 5 mm*5mm**25 mm
€2.99
χωρίς ΦΠΑ €2.41
Σε Απόθεμα
+ −
Filter for Stepper Motor Driver TMC2100
1140.863
This smoother can effectively eliminate low-speed non-uniform waveform signal so as to achieve a relatively flat signal waveform.
€2.01
χωρίς ΦΠΑ €1.62
Σε Απόθεμα
+ −
FC-280DR High-speed 10400RPM DC Motor with Long Shaft and capacitance for Anti-interference
1215.480
Model : FC-280R Operating Voltage Range : 6-12V Nominal : 12V No Load Speed : 10400 r/min No Load Current : 90mA Speed at Maximum Effiency : 10000 r/min Current at Maximum Efficiency : 175mA Torque at Maximum Efficiency : 10g/cm Output : 1.3W Stall Torque : 200g/cm...
€6.89
χωρίς ΦΠΑ €5.56
Σε Απόθεμα
+ −
Dual Servos Knob Serial Port Control Board Steering Gear
1256.534
The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control. Support manual mode and return to medium mode, switch by button, with mode indicator. Support knob adjustment or serial command control in manual mode. The...
€9.25
χωρίς ΦΠΑ €7.46
Σε Απόθεμα
+ −
DS3225 Waterproof High Torque Metal Gear Standard Digital Servo 25KG/0.13S - 270 Degrees
1215.856
Large torque - maximum torque can up to 25kg.cm (6.8V) High-precision metal gear with hard anodizing for better accuracy and longer service life CNC aluminium middle shell enhances heat dissipation and ensures the servo motor can work well Water proof rubber seals screws, made of first-grade...
€23.51
χωρίς ΦΠΑ €18.96
Σε Απόθεμα
+ −
DS3225 Waterproof High Torque Metal Gear Standard Digital Servo 25KG/0.13S - 180 Degrees
1215.857
Stall Torque (5V): 21 kg/cm (291.5oz/in) Stall Torque (6.8V): 24.5 kg/cm (340.1 oz/in) Speed : 0.15 sec/60°(5V) / 0.13 sec/60°(6.8V) Operating Voltage: 4.8 ~ 6.8 DC Volts Dead brand: 3μs Weight: 60 g (2.12 oz) Motor Type: DC Motor Gear Type: Copper & Aluminum...
€23.51
χωρίς ΦΠΑ €18.96
Σε Απόθεμα
+ −
DS3225 25KG Coreless Waterproof Digital RC Servo - Stainless Steel & Aluminum Metal Gear – 180 Degree
1215.855
Torque：(5.0v/6.0v/7.4V): 22.0 kg-cm (306 oz/in) │24.0 kg-cm (333 oz/in) │ 25.5 kg-cm (347 oz/in) Speed：(5.0v/6.0v/7.4V): 0.10 sec/60° │0.08 sec/60° │ 0.07 sec/60° Operating Voltage：5 ~ 7.4 DC Volts Dead brand：2μs Weight：60 g (2.12 oz) Motor Type：Coreless Motor Gear...
€42.16
χωρίς ΦΠΑ €34.00
Σε Απόθεμα
+ −
DRV8825 Stepper Driver Module with Heatsink for Arduino
1116.117
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
Dimmer Module 100W with Switch - Speed Regulation Module DIY Kit
1140.578
To module έρχεται σε μορφή kit ,το οποίο χρειάζεται assembly . PCB size: 2*3.3CM Rated power: P=UI;100w=220V*0.45A Model: 100w dimming module Rated power: 100 w Suitable for below 100W AC motor, the dimming light etc control (energy-saving lamps do not support)...
€2.23
χωρίς ΦΠΑ €1.80
Σε Απόθεμα
+ −
Deek-Robot Mini 2-Channel Motor Drive Module with L293D
1116.790
Input voltage DC4.5-25V 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES The Device is a...
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
DC3V-6V - 380 Mini DC Motor High Speed
1256.436
Weight: about 75 g Shaft diameter: 2.3 Body length: 38 Front steps diameter: 10 Former high level: 2.9 Body Diameter: 27.6 Motor Length: 63 Adjacent mounting hole spacing: 16 Diagonal mounting hole spacing: None Nut mounting hole size: 2.5MM Mounting holes: 2
€2.79
χωρίς ΦΠΑ €2.25
Μη Διαθέσιμο
DC12V 50mm Stroke 100N/10KG Load Force - 5mm/s Linear Actuator
1140.435
Input 12VDC Load 100N Speed 5mm per sec Limited switch With Inner tube material Aluminum Alloy Worm Gear Metal gear Stroke length 50mm Color Silver Operation temperature -26 ~ +65 degree
€56.00
χωρίς ΦΠΑ €45.16
Μη Διαθέσιμο
DC10-55V 40A PWM Motor Speed Controller 0~100% with Display & Case
1256.124
Features: DC 10-55V MAX 40A CW CCW Reversible Switch PWM Motor Speed Controller Perfect replacement for the old or damaged one Supports large current start LED display 0~100% speed percentage, easy to read Built in heat dissipating fan, great for fast heat dissipation...
€22.38
χωρίς ΦΠΑ €18.05
Σε Απόθεμα
+ −
DC Motor Speed Control PWM 10-50V 40A 2000W
1116.708
• 1. This product is suitable for speed control of universal DC motor, production line conveyor belt, pipe exhaust fan, treadmill and so on. • 2. Operating Voltage: DC10V-DC50V • 3. Control Power Rate: 0.01-2000W(Maximum Current: 40A) Different voltage correspond with different power...
€14.88
χωρίς ΦΠΑ €12.00
Σε Απόθεμα
+ −
DC Motor Bracket for 130 Motor (White)
1215.231
Easily mount standard 130 size hobby DC motors with this handy tough ABS plastic bracket. Featuring multiple mounting holes for convenient attachment and space for wires to be attached to the motor. 
€0.56
χωρίς ΦΠΑ €0.45
Μη Διαθέσιμο
DC 6V N20 Mini Micro Metal Gear Motor DC Motors Shaft M3 x 55mm
1256.671
N20 Mini Micro Metal Gear Motor DC 6V Shaft M3 x 55mm DC Motors 1000RPM Specification: material: metal Voltage: DC 6V Model: GA12-N20-M3*55 Speed: 1000 RPM Motor size: about 12 x 24mm (diameter * height) Shaft size: about M3 x 55mm (diameter * length)...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
DC 6V - 28V 3A PWM Regulator Motor Speed - Controller Switch
1116.707
    Features: This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of3A to your DC...
€4.48
χωρίς ΦΠΑ €3.61
Σε Απόθεμα
+ −
Επόμενα 96 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ