ΚΑΛΕΣΤΕ ΜΑΣ ΣΤΟ 2118502484
Προϊόντα
New Menu

Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα θα εξυπηρετούνται μέσω τηλεφώνου Δευτέρα εως Παρασκευή καθώς δεν υπάρχει τεχνικός για δια ζώσης εξυπηρέτηση στο φυσικό κατάστημα. Επίσης τα Σάββατα προσωρινά δεν υπάρχει καθόλου τεχνικός ηλεκτρονικών

Σχετικά με την κάλυψη διαθέσιμης θέσης ηλεκτρονικού μπορείτε να στέλνετε βιογραφικά στο iraklis@cableworks.gr

Drivers

Ταξινόμηση:
Χαμηλότερη τιμή πρώτα
16
ULN2003 4-Phase Stepper Driver Module (Blue PCB Board)
1116.268
Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% (25℃) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque:...
€1.70
χωρίς ΦΠΑ €1.37
Σε Απόθεμα
+ −
ULN2003 Stepper Motor Driver Board Module 5V for Arduino (Green PCB Board)
1116.297
ULN2003 Driver Board: A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm
€2.23
χωρίς ΦΠΑ €1.80
Μη Διαθέσιμο
L9110S H-bridge Stepper Motor / Dual DC Motor Driver Controller Board For Arduino
1116.135
Onboard two the L9110S motor control chip The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor The module input voltage :2.5-12V The 800mA continuous current output capability per channel Features : Low static work current Power supply...
€2.64
χωρίς ΦΠΑ €2.13
Σε Απόθεμα
+ −
L298N 1.5A Dual Channel H-Bridge Stepper / DC Motor PWM Driver Module
1116.373
Description: Motor drive module is ideal for use in battery-powered smart car, toy cars, robots. Supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed. Each can...
€2.80
χωρίς ΦΠΑ €2.26
Σε Απόθεμα
+ −
Deek-Robot Mini 2-Channel Motor Drive Module with L293D
1116.790
Input voltage DC4.5-25V 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES The Device is a...
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
Breakout Board for A4988 Stepper Motor Driver Module
1140.198
Simply plug an A4988 stepper motor driver into the socket, configure your micro-stepping settings with the dip switch selector and apply 9/12V motor power + 5V logic power to this little unit for a quick single motor setup. You can then connect your stepper motor to the output pins and control...
€3.35
χωρίς ΦΠΑ €2.70
Σε Απόθεμα
+ −
5V 28BYJ-48-5V 4-Phase Stepper Stepper Motor + Driver Board ULN2003 (Green) for Arduino
1116.298
5 lines and 4 phases can be driven by ordinary uln2003 chip; can also be connected in phase 2 development board. Supporting the use of a direct plug and easy to use stepper motor used in the development board. ULN2003 stepper motor driver board: A, B, C, D four-phase LED indicates...
€3.58
χωρίς ΦΠΑ €2.89
Σε Απόθεμα
+ −
L293D Wifi Motor Drive Shield Module For NodeMcu ESP8266
1116.559
Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H) Drive part...
€4.03
χωρίς ΦΠΑ €3.25
Σε Απόθεμα
+ −
28BYJ-48-5V Stepper Motor + DC 5V ULN2003 Stepper Motor Board 4-phase (Blue)
1116.052
Item Description: Diameter: 28mm Voltage: 5V Stepping angle: 5.625 x 1/64 Reduction ratio: 1/64
€4.46
χωρίς ΦΠΑ €3.60
Σε Απόθεμα
+ −
L293D Motor Driver Shield - Expansion Board For Arduino
1116.064
L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 12 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also...
€5.46
χωρίς ΦΠΑ €4.40
Σε Απόθεμα
+ −
9V-50V 10A PWM DC Motor Speed Controller
1256.053
Controls the speed of a DC motor with this controller High Effiency, high torque and low heat generation With reverse polarity protection, high current protection Suitable for the DC motor (or DC load) within 10A Specifications: Working Voltage: DC9V-DC50V Control...
€5.59
χωρίς ΦΠΑ €4.51
Σε Απόθεμα
+ −
Stepper Motor Driver Expansion Board for DRV8825/A4988
1215.042
Size: 42*42*15mm  Fixed: 3mm  Pitch: 1400*1400mil (35.56*35.56mm)  Logic voltage: 5V  Input voltage: 12-30V  Interface: direction, enable, speed  Applicable modules: A4988, DRV8825  Note : Please pay attention to the direction when installing the driver module,...
€6.04
χωρίς ΦΠΑ €4.87
Σε Απόθεμα
+ −
V3 Engraver - 3D Printer CNC Shield & Expansion Board A4988 Driver For Arduino
1116.080
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very...
€6.10
χωρίς ΦΠΑ €4.92
Σε Απόθεμα
+ −
DRV8825 Stepper Driver Module with Heatsink for Arduino
1116.117
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in...
€6.20
χωρίς ΦΠΑ €5.00
Σε Απόθεμα
+ −
PCA9685 16-Channel PWM Servo Motor Driver - I2C Module For Arduino Robot
1116.288
You want to make a robot, When we saw this chip, we quickly realized what an excellent add-on this would be. Using only two pins, control 16 free-running PWM outputs! I2C input, control 16 PWM output, you can control the 16 way servo motor. Specifications: Frequency:...
€7.28
χωρίς ΦΠΑ €5.87
Σε Απόθεμα
+ −
TMC2209 Stepper Motor Driver v2.0
1256.230
Features: Ultra quiet Large heat sink,good heat dissipation Support sensorless-homing function. Support uart mode by set jumper caps instead of welding on mks gen L V2.0,skr1.3/1.4,mks sgen L. Parameter: Default current:0.88a Recommend current:1.72a(at most)...
€8.41
χωρίς ΦΠΑ €6.78
Σε Απόθεμα
+ −
Επόμενα 11 προϊόντα
Φίλτρα Φίλτρα
Brand
Απόθεμα
Τιμή
Cookies

Η ιστοσελίδα χρησιμοποιεί cookies για την ευκολία της περιήγησης, την εξατομίκευση περιεχομένου και διαφημίσεων και την ανάλυση της επισκεψιμότητάς μας. Δείτε τους ανανεωμένους όρους χρήσης για την προστασία δεδομένων και τα cookies.

Τα παρακάτω cookies μας βοηθούν να βελτιώνουμε την εμπειρία χρήσης σας.

Συμφωνώ